高精度双向DC电源电流采样电路设计.pdfVIP

  • 0
  • 0
  • 约1.66万字
  • 约 5页
  • 2026-02-09 发布于山东
  • 举报

高精度双向DC电源电流采样电路设计

高精度双向DC电源电流采样电路设计

刘青,李铁才,张乃通

(1.哈尔滨工业大学电子与信息工程学院,黑龙江哈尔滨150001;

2.深圳航天科技创新研究院,广东深圳518057)

摘要:为适应双向DC/DC功率变换的电流采样需求,一种高精度高边电流采样电路被提出。其基本思

想是在功率电路的高边串入采样电阻,借助电流镜原理并引入偏置电流电路,将双向电流均转换为正向

电压输出。通过理论分析与仿真结合的方法对电流镜采样原理及4种不同的偏置电流电路方案进行对

比,最后通过实验数据验证了高精度高边电流采样电路的有效性。实验数据表明,该采样电路可在一25

—75℃的温度工作范围内,针对一l0一+l0A范围内的电流采样实现优于5%的采样精度。

关键词:DC/DC变换;电流镜;高边电流采样;采样精度

中图分类号:TM930.1文献标识码:A文章编号:1000—8829(2016)11—011l一05

AHigh-AccuracyBidirectionalCurrentSensingCircuitDesign

LIUQing一,LITie,cai,ZHANGNai—tong。

(1.SchoolofElectronicsandInformationEn~neefing,HarbinInstituteofTechnology,Hrabin150001,China;

2.ShenzhenAcademyofAerospaceTechnoloyg,Shenzhen518057,China)

Abstract:Currentsensingplaysanimportantroleincontrolling,monitoringorprotectionfunctionsofpower

systems.TomeetthecurrentsensingrequirementofbidirectionalDC/DCconverters,ahigh—accuracybidirec—

tionalcurrentsensingcircuitisproposed.Theproposedcurrentsensingcircuitinsertsaresistorinthepathof

thecurrenttobesensed,whilethecurrentmirrorandbiasedcurrentcircuitareintroduced.Therefore,thebidi—

rectionalcurrentcanbeexpressedbypositivevoltage.Bytheoreticalanalysisandsimulation,thesamplingthe—

oryisanalyzedandfourbiasedcurrentcircuitsarecompared.Atlast,experimentalresuhsverifiedtheproposed

method.Itisdemonstratedthattheproposedcurrentsensingcircuitcanachievehighaccuracybetterthan5%

atthetemperaturerangefrom一25℃to75~C.

Keywords:DC/DCconverter;currentmirror;high—sidecurrentsensing;samplingaccuracy

在DC/DC功率变换电路中,为实现保护、控制、监动态响应要求较高。

测等功能,电压和电流采样是不可或缺的。然而,不同目前电流采样的主要方式有霍尔传感器采

于电压信号采样,电流信号的采样一般需要插入某些样¨I2]、电感采样、采样电阻结合仪表运放采样¨、

感应器件,而增加的器件会对电路造成诸如功率损耗电流采样芯片采样及电流镜采样等J。霍尔传感

增加、电路复杂度提高等影响。在DC/DC变换器中,器

文档评论(0)

1亿VIP精品文档

相关文档