雪铁龙维修 手册 图Removal - refitting automatic gearbox fluid temperature sensor 307.docVIP

B2CG83K3-18/02/2004-307

??-AL4AUTOMATICGEARBOX

REMOVAL-REFITTING:AUTOMATICGEARBOXFLUIDTEMPERATURESENSOR

1-REMOVAL:拆除：

Removethehydraulicblock?.拆除液力控制盒（见相关操作）

NOTE:Toreplacethefluidtemperaturesensor(1),theentirehydraulicblockelectricalharnessassemblymustbereplaced.注意：如果更换自动变速箱油温传感器，必须更换自动变速箱液力控制盒线束总成

SPECIALFEATURE:AL4AUTOMATICGEARBOX

Removethe12-wayyellowconnectorfromthemodularconnector(3).拔掉接线模块3上的黄色的12通道接头

Removetheclip(4).脱开卡箍4

Removetheharnessassemblyonthehydraulicblockside.拆掉液力控制盒旁的线束总成

2-REFITTING:安装：

Whenrefittin