模具-注塑-对讲机外壳注射模设计.docVIP

模具-注塑-对讲机外壳注射模设计 摘要：本文详细介绍了interphone注射模具的设计。基于PRO/E建模，在完成塑件结构分析后，确定采用一模一腔、点浇口进料的三板式模具。根据基体尺寸，模架从标准模架库中调用。针对塑件两侧有侧凹，特优化设计了斜顶机构，并对该机构的加工工艺、使用效果进行 ... 摘要：本文详细介绍了interphone注射模具的设计。基于PRO/E建模，在完成塑件结构分析后，确定采用一模一腔、点浇口进料的三板式模具。根据基体尺寸，模架从标准模架库中调用。针对塑件两侧有侧凹，特优化设计了斜顶机构，并对该机构的加工工艺、使用效果进行了阐述。同时，本文对浇注系统、成型零件、脱模机构、斜顶杆侧抽芯机构、合模导向机构、温度调节系统、排气系统和部分零件的加工工艺也做了完整的设计计算。(所有权: 毕业设计网 ) BR关键词：注射模；侧浇口；斜顶杆机构BRBRThe design of the INTERPHONEBRinjectionnbsp; mouldBRMajority: Machine design amp; manufacturing AutomationBRAuthor:nbsp; Jon leenbsp;nbsp; Instructor: Shukun QianBRAbstractt ：This text has introduced the design of the interphone injection mould in detail. Because of PRO/E modeling , after analyzing the structure of the interphone, confirms using a cavity ,point gate and three plate a mould. according to the matrices size, the mould shelf was choosed from the 3D mold base standard library. There were concaves in both sides of moulding , so optimizing design the angle ejector maching ,and furthermore the producing technics,the appliation affects are discessed in detail. At the same time,in this text the feedsysterm, shaping part, drawing of patterns organization , Organization of ejection force.,shut mould lead organization , temperature control system , exhaust system and the technology analyse of some workparts were designed and calculated totally. BR7.5 垫块nbsp;22BR7.6 动模座板nbsp;22BR8 导柱导向机构的设计nbsp;23BR8.1 导柱导向机构的作用nbsp;23BR(所有权: 毕业设计网 ) BR8.2 导柱导套的选择nbsp;23BR9 排气槽的设计nbsp;24BR10 推出机构的设计nbsp;25BR10.1 选用原则nbsp;25BR10.2 推出机构的分类nbsp;25BR10.3 推出机构的组成nbsp;25BR10.4 脱模力的计算nbsp;25BR10.5 抽芯机构设计nbsp;26BR11nbsp; 温控系统设计nbsp;29BR11.1 模温对塑件质量的影响nbsp;29BR11.2 模温对生产效率的影响nbsp;29BR11.3 加热系统nbsp;30BR11.4 冷却系统nbsp;30BR11.4.1 冷却介质......................................................................30BR11.4.2 冷却装置的理论计算............................................................30BR11.4.3 冷却装置的结构形式............................................................31BR12 模具零部件材料选择nbsp;33BR12.1 塑料模选用钢材的原则nbsp;33BR1