JGJ128-2000建筑施工门式钢管脚手架安全技术规范英文版.docVIP

Industrial Standard of People’s Republic of China 建筑施工门式钢管脚手架安全技术规范 Safety and Technical Code for Frame-Type Steel-Tube Scaffolds in Construction JGJ 128—2000 J43—2000 Beijing 2000  Industrial Standard of the People’s Republic of China 建筑施工门式钢管脚手架安全技术规范 Safety and Technical Code for Frame-Type Steel-Tube Scaffolds in Construction JGJ 128—2000 Mainly prepared by: Harbin Industrial University Approved by: The Ministry of Construction of the People’s Republic of China Implemented from: Dec. 1, 2000 China Building Industry Publishing House Beijing 2000 Notice for issuance of industrial standard “Safety and Technical Code for Frame-Type Steel-Tube Scaffolds in Construction” Jian Biao [2000] No. 223 As required by “Notice for issuance of the plans for formulation and revision of standards and codes of project construction in 1989” released by the Ministry of Construction ([89] Jian Biao Ji Zi No.8), “Safety and Technical Code for Frame-Type Steel-Tube Scaffolds in Construction” prepared by the former Harbin Architectural University has been reviewed and approved to be industrial standard, in which articles 3.0.4, 6.2.2, 6.2.4.1, 6.5.4, 6.8.1, 7.3.1.4, 7.3.1.5, 7.3.2.1, 7.3.3.1, 7.5.4.4, 7.5.4.5, 7.5.4.6, 8.0.1, 8.0.2, 8.0.3, 8.0.5, 8.0.7, 8.0.10 and 9.4.3.6 are compulsory. This standard is numbered as JGJ 128—2000, and will be put into practice from Dec.1, 2000. This standard will be under management of Beijing Zhong Jian Architecture Scientific Technology Research Institute (subsidiary to the Ministry of Building and responsible for management of safety standard and technology in architecture engineering), and will be explained in detail by the current Harbin Industrial University. It is published by China Architectural Industry Publishing House under the organization of Standard Rating Research Institute, subsidiary to the Ministry of Building. The Ministry of Construction of the People’s Republic of China Oct. 11, 2000 Preface Upon requirement by [89] Ji