多层介质结构LC带通滤波器的交叉耦合设计.docVIP

  多层介质结构 LC 带通滤波器的交叉耦合 设计# 曹珂1，李启伟1，程崇虎2** 5 10 15 20 25 30 35 40 （1. 南京邮电大学电子科学与工程学院，南京 210003； 2. 南京邮电大学通信与信息工程学院，南京 210003） 摘要：本文给出了一种基于 LTCC 技术的多层介质结构带通滤波器模型，并用交叉耦合的方 法从相位的角度对其等效电路图进行了分析，解释了传输零点产生的原因。为验证解释的正 确性，在将等效电路图进行改动后再次进行了相位分析和仿真，二者的结论相符合。给出的 滤波器模型具有 5 个金属层和 4 个介质层，总体尺寸为 6mm×6mm×1.25mm，中心频率为 2.45GHz，3dB 带宽约为 340MHz。在设计时采用了独特的电感结构，并用缝隙电容实现了 源和负载之间的交叉耦合，从而保持了结构的紧凑。模型的仿真结果与电路仿真的结果相符， 展示出了滤波器所具有的良好性能。 关键词：低温共烧陶瓷；带通滤波器；交叉耦合；传输零点 中图分类号：TN713+.5 Design of LC Bandpass Filter with Cross-Coupling Constructed on Multilayer Substrates CAO Ke1, LI Qiwei1, CHENG Chonghu2 (1. School of Electronic Science and Engineering, Nanjing University of Posts and Telecommunications, NanJing 210003; 2. School of Telecommunication and Information Engineering, Nanjing University of Posts and Telecommunications, NanJing 210003) Abstract: A bandpass filter constructed on multilayer substrates using LTCC technology was proposed in this paper and the mechanisms producing transmission zeros were revealed by analyzing its equivalent circuit schematic in terms of phase and cross-coupling. To verify this analysis, a modified schematic was analyzed and simulated. The simulation results agree with the analysis again. The proposed filter, working at 2.45GHz while the 3dB bandwidth is about 340MHz, is consisted of 5 metal layers and 4 substrate layers and the overall size is about 6mm×5mm×1.25mm. By taking advantages of a unique inductor structure and a gap capacitor, which realized the cross-coupling between the source and load, the filter structure was designed compactly. Simulation results of the physical structure were found in agree with circuit model simulation results and both of them exhibited the favorable performance. Keywords: Low Temperature Co-fired Ceramic; Bandpass Filter; Cross-Coupling; Transmission Zero 0 引言 随着近年来无线通信技术的快速发展，越来越多的移动设备具有了蓝牙、Wi-Fi 等无线 通信功能。由于移动设备体积小、重量轻、功耗低，因此设计一款适用于移动设备的小型化、 高性能带通滤波器具有重要的实际意义。 目前，绝大多数的蓝牙、Wi-Fi 等无线通信系统均工作在工业、科学和医疗（ISM）频 段（中心频率为 2.45GHz）。在这个频段