智能安防报警系统的设计与实现.docVIP

目录 中文摘要 2 英文摘要 3 1 绪 论 4 2 智能安防报警系统总体设计 5 2．1 系统硬件设计 5 2．2 系统软件设计 6 3 电话信号识别与电话接口电路 8 3．1 振铃检测电路 8 3．2 自动摘挂机电路 9 4 凌阳音频播放 10 4．1 凌阳音频压缩和输出介绍 10 4．2 凌阳语音播放编程步骤 10 5 DTMF收发器MT8888原理和应用 16 5.1 DTMF收发器MT8888简介 16 5.2 MT8888引脚排列与功能 16 5.3 MT8888的组成 17 5.4 MT8888的工作模式 20 5.5 MT8888的应用 22 5.5.1 与SPCE061A接口 22 5.5.2 MT8888初始化 23 5.5.3 DTMF信号发送 24 5.5.4 电话信号音检测 25 6 显示模块 26 6.1 凌阳显示模块简介 26 6.2 凌阳显示模块原理 28 6.3 凌阳显示模块应用 30 7 报警探测装置 36 结论 38 谢辞 39 参考文献 40 附录1 系统硬件电路图 41 附录2 源程序 44 智能安防报警系统设计与实现 摘 要：本文系统的阐述了集防盗、防火和紧急呼救于一体，功能强大，适合于大众群体的智能安防报警系统的设计。本设计是专门为家庭用户设计的智能安防报警系统，具有完善的门磁检测、烟雾检测、燃气检测和屏幕显示等功能。本系统采用凌阳SPCE061A实验仪控制，当室内发生非法侵入时，无线门磁探测器向系统发送报警信号，系统启动语音播放程序通过喇叭高声播放预存的相应语音文件报警，实验仪上的LCD显示相应的警报类型，同时通过MT8888启动拨号程序，拨打预存的电话号码并检测电话信号音，反复拨打直至电话接通。电话接通后通过凌阳实验仪的另一路音频输出在电话中播放预存的相应语音文件。当发生火情或燃气泄漏时，无线烟雾探测器或燃气探测器向系统发送相应的报警信号，系统就会如上进行处理，播放与之相应的语音文件。 关键词：SPCE061A；MT8888；DTMF；电话报警；LCD Abstract: This paper described a set of security, fire and emergency SOS integrated, powerful, suitable for public groups Intelligent Alarm System design. The design is specifically for home users of Intelligent Design Security Alarm System is the perfect Magnetometer detection, smoke detection, Gas detection and display, and other functions. The system uses Sunplus SPCE061A experimental instrument control, when the room is unlawful intrusion, Magnetometer detectors wireless system to send alarm signals Voice activated player shouted through loudspeakers to broadcast voice stored in the corresponding paper reported Experiment on the LCD display alerts corresponding types, through MT8888 activated dialing procedures, Call the telephone numbers stored and Telephone Signal Detection and repeatedly call up telephone access. After the telephone connected through Sunplus experimental instrument another channel audio output on the phone broadcast stored in the corresponding sound files. When fires or gas leakage, wireless smoke detectors or gas detector corresponding to transmit alarm signals As system will be proc