六氟化硫断路器的组成及其应用和维护.doc

毕业设计(论文)报告 题目名称： 六氟化硫断路器的组成及其应用和维护 学生姓名： 王兵兵 学 号： 0904043241 二级学院（系）/专业： 能源与电气 / 电气自动化 班 级： 电气0921 指导教师： 秦咏红 2012 年 5 月 20 日 摘要 本人因为在苏州盛虹化纤股份有限公司实习，系列包括KV和KV两个电压等级产品，用于切合正常的负荷电流、故障电流及转换线路，实现对系统的控制和保护。LW10B-252六氟化硫断路器的大量使用，更是取代进口产品比较好的选择，所以探讨此型号断路器的开关专业来说必须超前进行，以尽快适应新设备的管理水平和提高设备的运行、检修维护水平六氟化硫断路器?设备Because I in Suzhou Sheng Hong chemical Limited by Share Ltd practice, so for the SF6 circuit breakers cognition and application are more familiar with, so SF6 the application of circuit breaker and its composition for a study.Six SF series includes KV and KV two voltage grades of products, used to meet the normal load current, the fault current and switching circuit, the realization of the system control and protection.LW10B-252 six SF6 circuit breaker used, is to replace imported products better, so on this type circuit breakers structural design and the maintenance, the switch to must advance, to adapt the new equipment management level and improve the equipment operation, maintenance level.The main use of SF6 circuit breaker SF6 high gas insulation, gas and stability characteristics, quenching process using SF6 gas blowing arc to disconnect the high voltage goal, six SF6 circuit breaker is the use of a vacuum when the insulation strength, in the contact separation process in order to achieve the purpose of the arc breaking, breaking voltage below SF6 circuit breaker is composed of two is not the same, but the basic structure are dynamic, static contact, rod, interrupter.With excellent arc extinguishing performance and insulation performance of SF6 gas is used as circuit breaker arc, called SF6 circuit breaker in electric power system. SF6 breaker not only when the system is in normal operation can be cut off and is connected with the high voltage line and a variety of no-load and load cu