无线数传信号编码盲识别与解码技术研究.pdfVIP

第 25 卷 第 10 期 电子测量与仪器学报 Vol. 25 No. 10 2011 年 10 月 JOURNAL OF ELECTRONIC MEASUREMENT AND INSTRUMENT · 905 · DOI: 10.3724/SP.J.1187.2011.00905 无线数传信号编码盲识别与解码技术研究 1, 2 1, 2 陈金杰 杨俊安 (1. 电子工程学院 合肥 230037; 2. 安徽省电子制约技术重点实验室 合肥 230037) 摘 要: 针对无线数传信号中广泛采用的线性分组码盲识别问题展开研究, 利用分组码的线性构造和校验性质, 对线性 分组码的新型数据矩阵盲识别模型进行了改进。理论上通过求解二元域线性方程组来实现对编码参数及生成矩阵的盲识别, 降低了识别所需的数据量; 对改进的识别模型进行了大量的仿真分析, 结果表明其识别模型的有效性 ; 论文最后将改进的识 别模型应用到工程实践当中, 对实际接收的无线数传信号进行分析, 完成了对信道编码和信源编码的盲识别, 并成功恢复出 数据信息。 关键词: 线性分组码; 盲识别; 生成矩阵 POCSAG 码 中图分类号: TP911.22 文献标识码: A 国家标准学科分类代码: 510.5015 Research on blind recognition for wireless digital transmission signals encoding and decoding technology Chen Jinjie1, 2 Yang Junan1, 2 (1. Electronic Engineering Institute, Hefei 230037, China; 2. Anhui Key Laboratory of Electronic Restriction, Hefei 230037, China) Abstract: The blind recognition technology of linear block codes, which is widely used in wireless digital transmis- sion signals, is researched in the paper. Based on the linear structure and the checkout properties of block codes, the new data matrix blind recognition model of the linear block code is improved. Theoretically, by forming and solving the linear equation set in the dual domain, the problem of recognition encoding parameters and generator matrix is solved and the data volume is lowered in the recognition. The effectiveness of the improved model is proved by large amount of simula- tion experiments. Finally the improved model is used to analyze wireless digital transmission signals, which are collected in actual engin