毕业设计（论文）-PLC高炉冲渣水泵房控制系统设计.docVIP

摘 要 目前PLC 己成为工业控制的标准设备,是自动控制系统的三大技术支柱之一, 在自动控制系统的应用中,可编程序控制器占据着举足轻重的地位。 本次设计的内容是系列在熟练掌握编程及特点和出与PLC运行相一致的过程和结果，使抽象的程序一目了然地展现与眼前。 本论文大致可分为四个部分：第一部分主要对设计的相关知识做了介绍；第二部分介绍了PLC的基本组成和工作原理；第三部分主要是对；最后一部分是。 本论文所设计软件可用于PLC的模拟运行与学习，经进一步完善和扩充功能也可作为基于计算机平台控制技术的基础。 Abstract At present PLC has become the standard of industrial control equipment, automatic control system is one of the pillars of the three technology, the application in automatic control system, PLC holds an important position. This design is the content of the Siemens S7300 series in programming software and wincc6.2 programming environment water cinder flushing system programming design and PC control screen design. In the master S7300 ladder-diagram programming and characteristics and WinCC PC programming, under the premise of the system overall design, repeated test. In the picture window shows WinCC is consistent with PLC operation of the process and result, make the abstract program clearly show and eyes. This paper is divided into four parts: the first part of main water cinder flushing system design of the related knowledge are introduced; The second part introduces the basic composition of PLC and working principle and the application of PLC in automation system; The third part is mainly to the water cinder flushing system is introduced and the experimental research drawings; The last part is the water cinder flushing system paper narrative. This paper design software can be used for simulation of the PLC and WinCC operation and study, the further improvement and extend the functionality can be used as a platform based on computer control technology foundation. Key words: PLC; WinCC; Picture window 目 录 1 序言 1 1.1 PLC的定义 1 1.2 PLC的特点 1 1.3 PLC的应用领域 2 1.4 选题背景和意义 3 1.5 本文主要研究对象和工作任务 4 2 Step7编程软件介绍 5 2.1 Step7编程软件简介 5 2.2 Step7编程软件使用步骤 5 2.2.1 建立新项目 5 2.2.2 硬件组态 9 2.2.3 编写程序 12 2.2.4 调试运行 14 3 WinCC组态软件介绍 15 3.1 WinCC组态软件简介 15 3.2 WinCC简单使用步骤 15 4 水冲渣系统设计图纸 17 4.1 设计系统过程控制流程图 17 4.2 设计冲渣水泵系统的PLC硬件结构图 17