产品造型设计中的用户知识与设计知识研究.pdfVIP

) ) ) 1 2 1 3 1 罗仕鉴 朱上上 孙守迁 唐明晰 潘云鹤 1. 浙江大学计算机学院, 杭州, 310027 2. 浙江工业大学艺术学院, 杭州, 310032 3. 香港理工大学 计技术研究中心, 香港 : 从工业 计出发, 讨论了用户内隐知识与 计知识的关系, 建立了用 户知识与 计知识的匹配与碰撞模型, 探讨了其关键技术和研究方法以数控 机床造型 计为例, 采用口语分析法和语义差异法等方法分析了用户知识与 计知识的获取及表征形式, 将内隐知识外显化, 验证了该匹配模型, 为进 一步完善计算机辅助工业 计及数控机床网络化协同 计奠定基础 : ; ; ; ; ; : TH166 : 1004 ) 132 Ú( 2004) 08) 0709 ) 04 Case Study on User Knowledge and Design Knowledge in Product Form Design 1 2 1 3 1 Luo Shijian Zhu Shangshang Sun Shouqian Tang M ing i Pan Yunhe 1. Zhejiang University, Hangzhou, 310027 2. Zhejiang University of Technology, Hangzhou, 310032 3.Hong Kong Polytechnic U niversity, Hong Kong Abstract: From industrial design, the user implicit knowledge and design knowledge w ere e plored, the matching model of user know ledge and design know ledge w as put forw ard, and the key technologies and methods w ere discussed. Taking the numerical controlled machine tool form design as an e ample, pro- tocol analysis and semantic differential method etc. were adopted to analyze the acquisition and representa- tion of user know ledge and design know ledge, manifest the implicit know ledge and test the model so as to further improve computer- aided industrial design and the collaborative cyber- design system of numerical controlled machine tool. Key words: product form design; e plicit knowledge; implicit know ledge; design know ledge; protocol analysis; semantic differential 0 引言