基于DSP的SPWM程序.docVIP

#include DSP280x_Device.h // DSP280x Headerfile Include File #include DSP280x_Examples.h // DSP280x Examples Include File typedef struct { volatile struct EPWM_REGS *EPwmRegHandle; Uint16 EPwm_CMPA_Direction; Uint16 EPwm_CMPB_Direction; Uint16 EPwmTimerIntCount; Uint16 EPwmMaxCMPA; Uint16 EPwmMinCMPA; Uint16 EPwmMaxCMPB; Uint16 EPwmMinCMPB; }EPWM_INFO; // Prototype statements for functions found within this file. void InitEPwm1Example(void); void InitEPwm2Example(void); void InitEPwm3Example(void); interrupt void epwm1_isr(void); interrupt void epwm2_isr(void); interrupt void epwm3_isr(void); void update_compare(EPWM_INFO*); // Global variables used in this example EPWM_INFO epwm1_info; EPWM_INFO epwm2_info; EPWM_INFO epwm3_info; // Configure the period for each timer #define EPWM1_TIMER_TBPRD 2000 // Period register #define EPWM1_MAX_CMPA 1950 #define EPWM1_MIN_CMPA 50 #define EPWM1_MAX_CMPB 1950 #define EPWM1_MIN_CMPB 50 #define EPWM2_TIMER_TBPRD 2000 // Period register #define EPWM2_MAX_CMPA 1950 #define EPWM2_MIN_CMPA 50 #define EPWM2_MAX_CMPB 1950 #define EPWM2_MIN_CMPB 50 #define EPWM3_TIMER_TBPRD 2000 // Period register #define EPWM3_MAX_CMPA 950 #define EPWM3_MIN_CMPA 50 #define EPWM3_MAX_CMPB 1950 #define EPWM3_MIN_CMPB 1050 // To keep track of which way the compare value is moving #define EPWM_CMP_UP 1 #define EPWM_CMP_DOWN 0 void main(void) { // Step 1. Initialize System Control: // PLL, WatchDog, enable Peripheral Clocks // This example function is found in the DSP280x_SysCtrl.c file. InitSysCtrl(); // Step 2. Initalize GPIO: // This example function is found in the DSP280x_Gpio.c file and // illustrates how to set the GPIO to its default state. // InitGpio(); // Skipped for this example EALLOW; GpioCtrlRegs.GPAMUX1.all = 0x0; // GPIO pin GpioCtrlRegs.GPADIR.all = 0xFF; // Output pin GpioDataRegs.GP