小功率LED驱动电源研究与设计.pdfVIP

摘要 摘 要 LED 照明技术迅速普及，其核心部件的驱动电源变得十分重要，市场上LED 驱动电源或多或少都存在着一些问题，制约了LED 照明效率的提高，解决LED 照 明驱动的相关问题越来越受到重视。论文针对小功率恒流控制技术进行了深入研 究。 深入研究分析了LED 驱动电源的相关理论和技术；在进行需求分析的基础上， 完成了小功率恒流控制驱动电源的体系结构设计和相关电路模块的详细设计，电 路模块包括EMI 滤波器、输入端保护电路、输入整流桥、钳位保护电路、功率因 数校正、高频变压器、控制环路等，正确地选择和计算出各电路的参数；采用Saber 仿真软件对关键电路和整体电路进行了仿真验证，检验所设计电路及其参数的准 确性和合理性。 仿真验证结果表明，设计的小功率LED 驱动电源电源效率为85%；电流纹波 系数为0.02% ；电源的各项技术指标符合设计需求。 关键词：LED 恒流 开关电源 反激变换器 Abstract Abstract With the increasingly rapid popularization of LED lighting technology, the drive power which is the core component becomes very important, however, there are some problems in the LED drive power of the market, which gives rise to restrict the efficiency of LED lighting, now to solve LED lighting driver attracts more and more attention. Constant current control for low-power technology is carried out in-depth study in the paper . The theory and technology of the LED driver power supply are deeply researched and analyzed; based on the needs analysis, the architecture of low-power constant current control of drive power and the relative circuit modules are designed, the circuit module includes EMI filter, input protected circuit, input rectifier bridge, clamp protection circuit, power factor correction, high frequency transformer, control loop, the various parameters of the circuit are correctly chosen and calculated; the Saber simulation software is applied to simulate the key circuit and the whole circuit, and tests the accuracy and reasonableness of the design of the circuit and its parameters. The results of simulation show that the power efficiency of the design of low-power LED driver