灌装生产线灌装阀的设计说明书.docVIP

摘 要在排气通道设有,用来安装压紧螺母 ，阀可以通过调节螺母和压紧螺母调节弹簧的张力和阀体尺寸，用来调节灌装过程中一些小的光装误差，本发明在于灌装完成后能及时停止灌装,灌装精度高,节约能源,且液体灌装阀结构简单。Abstract In this the sis, the layout and arrangement of the liquid filling production line filling valve design, and liquid filling rotary filling machine. The structure of the liquid filling valve is the upper part of the valve body to the lower part of the liquid inlet valve in the liquid outlet, and exports and filling the first part has a sealing device through the squeeze pressure with sealing device contact, the upper part of the valve body set exhaust pipes, one end of the exhaust pipe extending from the valve body inside through the liquid outlet and filling heads connected together and the other end extending liquid with an external Unicom thus excluding gas, liquid filling valve is turned on. the valve element of an upper liquid inlet and a lower liquid outlet will form a liquid passage such that the liquid from the channel into the outer diameter of the bottle body, the maximum size of the filling head with larger than the maximum size of the fluid channel, and the sliding body alignment can to avoid the process of filling the hydraulic force the formation of a large number of foam filling accuracy and efficiency, is installed in the exhaust channel compression nut at a thread, used to install the compression nut, the valve can be pressed by adjusting nut and nut to adjust the spring tension and body size, is used to adjust the process of filling some small light mounting error, the present invention is that after completion of the filling time to stop filling, high precision filling, energy conservation, widely used, high efficiency and liquid filling valve structure is simple. Keywords: sliding body; The exhaust; Decorate; low pressure of Elastic 目 录 要 III Abstract IV 目 录 V 1 绪论 1 1.1 本课题的研究内容和意义 1 1.2 国内外的发展概况 1 1.3 本课题应达到的要求 2 2 灌装生产线整体结构设计 3 2.1 方案的选取 3 2.1.1 直线型灌装机 3 2.1.2 旋转型灌装机 3 2.1.3 自动化灌装机 4 2.2 生产线各机构的设计 5 2.2.1 灌装的供瓶机构 5 2.2.2 灌装的供料