基于三坐标测量仪的油泵体零件检测方案制订与实施说明书.docVIP

摘 要 关键词 Abstract Pump stock is the principle part of fuel injection pump. In the past check process, because of various positional tolerance、rigorous control needs 、backward detecting means, low measure effect、poor measure ,accuracy and other programs always exist. With the fast and fast development of new product open-up and more various processing methods, how to improve measure methods to fit more strict needs to process control is the urge program to solve in measure field of our company. According to practical situation “(our company have purchased a CMM and three height gauges to improve measure equipment), at present, focal point is the research about advanced measure method and how to inseparably effective jion advanced measure method with practical check work together. This research thesis is based on it. First, thesis makes clear to put research direct and emphasis on measure of new product’ dimension and relative measure requirement. To have a overall understanding, thesis also make a simply introduction of measure theory about relative element under test and owned measure method. Second, as the focal point of research, thesis gives expound to measure principle of CMM、three co-ordinate measure principle of basis element under test and how to measure and simplify measure on measure of relative key position dimension in CMM. In this chapter, thesis also gives a principal analysis of different proformance index of CMM and item on how to purchase. Third, to point out the link between measure and processing method, thesis gives introduce of main processing method, emphasis the join between measure and processing. Measure should spread out on basis of different processing method, for instance, numerically-controlled machining center、general manufacturing installation, definite main control point to different processing method. Thesis points out that CMM can really improve check effect, this must depend on effective join with manufacture process. Fo