【电子信息工程毕业设计+文献综述+开题报告】基于DSP的谐波电能计量装置硬件电路的设计.docVIP

（20_ _届） 本科毕业设计 基于DSP的谐波电能计量装置硬件电路的设计 摘 要 近几十年来，电力系统中非线性负载得到广泛使用，各种电力电子装置也迅速发展，公用电网的谐波污染日趋严重，为了有效地了解电力系统谐波的实际情况，电能质量检测成为保证电能良好供应的关键。在电力系统谐波测量系统中，要尽量使检测装置具有较强的测量功能，高准确度和高抗干扰性，同时尽可能降低成本。 本文对此提出一种基于DSP的谐波电能计量装置的设计，以单片机89C51作为主控制器，含有数字信号处理的电能计量芯片ATT7022B作为从CPU的主从系统设计构想，来设计硬件电路。该装置结构简单，造价低廉，运算速度快，而且易于操作。本论文集中讨论基于DSP该装置的硬件电路的设计方法，包括以下几个功能模块的设计：单片机微处理器模块，数据测量与转换电路，计算并送终端设备显示电路，通信转换电路等。 关键词：谐波，电能质量，ATT7022B，硬件电路 The Design of Hardware Solution of Harmonic Energy Metering Device Based on DSP Abstract In recent decades, nonlinear loads in power system are widely used ,Various power electronic devices are also developing rapidly,Utility grid harmonic pollution is worsening.In order to understand the actual situation effectively in power system harmonics, power quality measure as the key to ensuring a good supply of electrical energy. As far as possible the measurement detection device has a strong functions, high accuracy and high noise immunity, while minimizing costs in the harmonic measurement system of the power system. This paper presents a harmonic energy metering devices of DSP-based design. We will use master-slave system design concept which the 89C51 microcontroller as the main controller and the energy metering chip ATT7022B with digital signal processing as slave CPU to design the hardware circuit.This device structure is simple, low cost, high operation speed, and easy to operate.This paper focuses on the design approaches of the hardware circuit of the device based on DSP , including the following function modules:Single Chip Microprocessor Modules,Data measurement and conversion circuit, Calculated and sent to the terminal equipment display circuit, Communication converter ,and so on. Keywords: harmonic，Power Quality, ATT7022B, ardware 目录 摘 要 III Abstract IV 1 绪论 1 1.1课题的背景 1 1.2课题的意义 1 1.3国内外研究发展动态 2 1.4课题研究的主要内容 3 2电力系统谐波 4 2.1谐波概念 4 2.2谐波源分析 4 2.3谐波的危害 6 2.4 谐波检测的方法 6 3系统的总体设计 9 3.1系统的硬件设计 9 3.1系统的软件设计 9 4电力谐波检测装置的硬件设计 11 4.1 电压、电流采样电路 11 4