外文翻译-创建一个库在运行时通过促使.docVIP

外语文献翻译 翻译名称 VERICUT翻译原文 系 别 机电工程系 专 业 机械设计制造及其自动化 班 级 姓 名 指导教师 Session 30- Create an OptiPath Library While Building a Tool List This session shows how to build/modify an OptiPath library when building a Tool? List. The sample G-Code tool path file to be optimized uses 2 cutting tools: T1, T2. The demonstration shows how to link cutting tools in the tool path file with existing OptiPath records or create new ones interactively while VERICUT is scanning for the tool chance records. See also: Session 29- Optimize Feed Rates via OptiPath Tool List Method or Session 31- Create an OptiPath Library via Prompting At Runtime Session Steps: Optimize an Inch Tool Path ?Cutters used by sample tool path op_mold.mcd: 1. In VERICUT, open the sample op_mold.usr User file File Open Shortcut=CGTECH_SAMPLES File Name=op_mold.usr, Open If prompted, respond as follows:?Reset cut model? Reset / Save changes? No 2. Use OptiPath Control to reference the optipath.olb OptiPath Library file, and indicate cutting H13 tool steel on the 3-axis mill machine OptiPath Control: Settings tab OptiPath Library, Browse Shortcut=Working Directory File name=optipath.olb, OK (If optipath.olb is not available use CGTech sample op_mold.olb) Material=H13 Tool Steel Machine=3 ax Mill OK 3. While building a tool list, link OptiPath records to cutting tools used by the tool path file A tool list can be generated by scanning the tool path file. By default, the tool change events in the list represent the pocket numbers of cutting tools used by the tool path file. These events can also be linked to OptiPath records for tool path optimization. When Prompt for OptiPath settings while building is active, you can define the OptiPath settings for cutting tools to be optimized in the list. Setup Toolpath