光碟机激励器结构系统动态特性研究.pdf

Classified Index: TH113 U.D.C: 621 Dissertation for the Master’s Degree of Engineering RESEARCH OF DYNAMIC CHARACTERISTIC FOR DRIVER’S ACTUATOR STRUCTURE SYSTEM Candidate Zhu Zhiyong Supervisor Professor Li bing Associate Supervisor Senior Engineer Liu Hongren Academic Degree Applied for Master of Engineering Speciality Mechanical Engineering Affiliation Foxconn Precision Industry Shenzhen Co. Ltd. Date of Defence Dec, 2009 Degree-Conferring-Institution Harbin Institute of Technology ACTUATOR 20,000Hz X 77.91% I Abstract The objective lens holder is a key part on an actuator, and the objective lens is on it. With the high-speed movement of the objective lens, its high frequency can reach above twenty thousand Hz , so the structure rigidity of the objective lens holder becomes very important. The actuator is the executing part of the optical pickup, and its frequency bandwidth determines the servo stability. With the disc system reads the data more quickly, the dynamic characteristic of the driver needs more highly correspondingly too. What this dissertation is based on the 2-D wire spring type actuator as the object made by X company, adopting the method of simulation coupled with experimental tools, analyzing the influence of its structural design on the dynamic characteristics of actuator. This dissertation set up a theoretical model of the actuator. It adopted a finite element method,and performed the simulation analysis to the actuator. The dynamic characteristic was systematically