DVD遥控器前盖塑料模设计（含全套CAD图纸）.docVIP

买文档后送图纸，QQ 194535455 DVD遥控器前盖塑料模设计 模具设计与制造专业 作者：刘丹 指导老师：周立 摘要: 随着现代工业的迅猛发展, 注塑成型在机械、电子、航空航天工业、生物领域及日用品生产中所占的比例越来越大。本次设计的是DVD遥控器前盖塑料模具，制件的结构决定了该模具必须同时使用侧抽芯。设计过程整体采用现代先进的模具加工制造方法和强大的Pro/Engineer Wildfire 2.0模具设计软件相结合，在保证设计质量的同时设计速度也有提高，设计思路及要求符合现代模具设计的潮流和未来的发展方向。 关键词: 注塑成型;塑料模具;遥控器;侧抽芯； Design of Injection Molding Die for the Front Cover of the very Remote Controler of DVD Material Processing and Control Engineering Major Author: Supervise teacher: Abstract: With the rapid development of industry, the mould plastics shapings covers more and more in mechanical industry, electronics industry, spaceflight industry,biological field and production of daily necessities. This remote controler front cover of DVD molding die must include special slide pull structure because the structure of the product. This design is the integration of modern advanced mould process manufacturing approach and powerfull Pro/Engineer Wildfire 2.0 mold design，not only the design quality is assured but also heightened the design speed. The thought and requirement of this design accord to the trend of contemporary mold design and its future of development direction. Keywords: Mould plastics shaping;Injiectiong mold die;Remote controller;Slide pull structure; 目 录 前言 1 塑件成型工艺分析 1.1 塑件分析 ………………………………………………………………………………………………1 1.2 注射模的组成简介 ……………………………………………………………………………………2 1.3 注射成型性能分析 ……………………………………………………………………………………3 1.4 所选用的塑件材料种类 ………………………………………………………………………………5 1.5 PS塑料的注射成型工艺 ………………………………………………………………………………6 1.6 塑件可能产生的缺陷及相应的消除措施 ……………………………………………………………7 2 拟定模具结构形式 2.1 确定型腔数量及排列方式 ……………………………………………………………………………8 2.2 模具结构形式的确定 …………………………………………………………………………………8 3 注塑机型号的确定 3.1 塑件计算 ………………………………………………………………………………………………9 3.2 注射机型号的确定 ……………………………………………………………………………………9 3.3 注射机及型腔数量的校核 ……………………………………………………………………………9 4 塑件分型面位置的确定 4.1 分型面的形式…………………………………………………………………………………………12 4.2 分型面选取的原则……………………………………………………………………………………12 5 模具浇注系统设计 5.1 浇注系统设计原则 ……………………………………………………………