颗粒包装机自动供料系统的设计【附电子版图纸】.doc

全套图纸，加1360715675 本科毕业设计(论文) 题目：设计 系 别： 机电信息系 专 业： 机械设计制造及其自动化 班 级： 学 生： 学 号： 指导教师： 2013年5月 颗粒包装机自动供料系统的设计 摘要 本设计是关于颗粒包装机自动供料系统的设计。颗粒包装机是将小颗粒产品通过计量装入包装袋内，再进行封装的包装机械。能较大提高生产效率、降低人工劳动强度。 本主要设计颗粒包装机的包装材料成型与供送系统，包括供辊，引导辊，成型器；物料供给系统，包括料斗，计量器，导流槽；以及计量器的传动系统。本次设计采用了象鼻成型器和改进后的转鼓式计量装置。 关键词：颗粒包装机；成型器；计量器 A design of the automatically feeding system for Granule packing machine Abstract This design is automatic feeding system of packaging machine. Granule packaging machine feeds small products through the measurement into the packing bag, and then packaging system to finish packing. It could greatly improve the production efficiency,and reduce labor intensity. This design mainly research materials for structure design and packaging material feeding system. Determined firstly by packing machine production capacity to complete material metering device size, thus completing the material supply. To determine the route followed by packaging materials to finished packaging material guide roller position feeding. Packaging material forming the main design particles this design packaging machine and feeding system, including the supply roller, and sent packing material guide roller, forming device; material supply system, including the hopper, measuring device, guide groove; and the metering transmission system. This design uses a drum type metering device for trunk shaper and it improved better than any other types which exist in this society. This design can improve the packaging performance, such as simple structure, light weight, small size, low cost of equipment, operation safety, convenient operation, and easy to repair and management for users. Key Words: granule packing machine; shaper; meter 目录 摘要 I Abstract II 1 绪论 1 1.1题目背景和意义 1 1.2国内外发展现状 1 1.2.1国外发展现状 2 1.2.2国内发展现状 3 2 包装机概述 6 2.1产品包装概述 6 2.2包装机的分类 7 2.3包装机的组成 8 2.4颗粒包装机的工作原理 3 方案设计及选