遥控器注塑注射模具设计【优秀机械专业论文】【全套带CAD图】.doc

精品机械毕业设计 答辩CAD图纸资料 优秀通过答辩 本 科 生 毕 业 设 计（论文） （ 2014届） 工程学院  本科生毕业设计（论文） 【摘要】：随着中国的经济发展快速塑料行业也随之崛起，人们的日常生活中已经离不开塑料制品。特别是在办公设备，照相设备，汽车，交通，等方面尤为突出。塑料成型模具是制造塑料的工具，就是利用特定形状去做成具有一定形状和尺寸的塑料制品的工艺产品。用塑料模具生产成品优点是形成简单、材料利用率高、产品的大小尺寸规格一致，特别是对大批量生产的塑料产品，更是能获得价廉物美的结果。现代塑料产业的发展与模具设计制造有极密切的关系。随着塑料业的飞速发展，塑料模具产业也随之迅速发展。本文以遥控器为例,介绍了注塑模具的设计方法和流程。首先根据塑件的功能与用途用UG软件对零件进行三维造型、然后选择注塑机并确定型腔数目、接着确定成型的方案、总体结构的设计、分型面的设计、设计浇注系统、脱模机构的设计、冷却方法设计等。该设计方法对其他不同结构产品的注塑模具设计有一定的参考价值。本课题主要运用 Pro/ENGINEER 4.0及其EMX4.1模块和Auto CAD2006来完成整个设计工作。此外运用Pro/E中的塑料顾问模块（Plastic Adviser）对塑件制品进行注射仿真分析,即塑料在熔体状态下注射成型过程中的填充状态、注射压力变化、温度缺陷等d等情况. 在整个过程中学习到了许多的模具设计的知识,深化了在学校所学的知识。设计的整个过程实现了无纸化，有利于提高模具的生产效率,节约生产成本，大大缩短生产周期。 【关键词】：模具设计;遥控器外壳; 塑料成型；Pro/ENGINEER 4.0 【Abstract】： Chinas plastics industry with the rapid rise of Chinas economic development, plastic products used in peoples daily life is very extensive. Especially in office equipment, photographic equipment, automobiles, transportation, and other aspects especially. Plastic is molded plastic mold tool is the use of a certain specific shape to the shape and size of molded plastics technology based equipment.The main advantage of using plastic mold manufacturing production is simple and material utilization high, high productivity, product sizes consistent, especially for mass production of mechanical and electrical products, better access to cheap and economic effects. With the rapid development of the plastics industry, plastic mold industry also will be rapid development. This topic main use Pro/NEGINEER 4.0 and EMX4.1 module and Auto CAD 2006 to complete the design work.Furthermore use of Pro/E of plistic consultant module (Plastic Adviser) pieces of plastic injection products for simulation and analysis, which is in melt plastic injection molding state in the process of filling state、injection pressure changes 、temperature defects and so on situation.In the process I have learned a lot of konwledge of mould design ,deepened in the knowledge acquired by the sc