遥控器电池后盖模具设计【优秀机械专业论文】【全套带CAD图】.doc

精品机械毕业设计 答辩CAD图纸资料 优秀通过答辩 摘 要 本文详细介绍了遥控器电池后盖注塑模具的设计，共分十四节，主要包括：塑件材料的分析与设计方案的论证；注塑机的选择；模具结构的设计；成型零件的设计；导向机构的设计；脱模机构的设计；侧向分型与抽芯机构的设计等。 本次设计为一模两腔，塑件材料选用了丙烯腈－丁二烯－苯乙烯共聚物（即工程材料ABS），浇口形式选用了侧浇口，模具结构为直接分型——推杆推出机构。通过以下计算和设计是可行的，并可以应用到实际生产中。 本次设计主要是对一种塑料遥控器电池后盖进行模具设计。本文先介绍了注射模具国内外的发现状况及发展趋势，其次介绍了注射成型原理和工艺过程；根据塑件要求选择合适的注塑机，进而选择合适的浇注系统与冷却系统；通过计算，对导向机构、脱模机构和侧向分形与抽芯机构进行设计。 该模具的凸凹模均采用嵌入式的型腔和型芯，精度高，节省材料，改善了模具加工的工艺性，降低了模具的生产成本。该模具采用单分型面设计，通过滑块和斜导柱实现开合模动作，模具运动平稳可靠。塑件能顺利脱模，该模具总体结构设计合理，模具的制造成本低。成型的壳体塑件质量合格稳定，使塑件质量符合设计和使用要求。关键词：遥控器电池后盖；注塑模具；侧抽芯机构；导向机构；脱模机构  The esign of the Telecontroller Injection Mold Abstract This paper introduced the design of telecontroller,and consisted 14 parts.Mainly include analysis of plastic material and argumentation of design project; selecting injection machine; devising mold structure;devising molding parts; devising oriented framework; devising stripping framework; devising side parting and pulling framework. The mold is consisted of two cavities. The plastic material select acrylonitrile butadiene-styrene copolymer (i.e.engineering material ABS). The sprue form choose a side gate, die structure for direct classification--push rod pushing mechanism.By the following calculation and design is feasible, and can be applied to practical production. The design is mainly remote control battery cover of a plastic mold design. This paper first describes the situation and development trend of the injection mold found at home and abroad, followed by injection molding principle and process; plastic parts require the injection molding machine, and then select the appropriate gating system and cooling system;, oriented agencies, stripping agencies and lateral fractal design core-pulling mechanism. The mold punch and die are embedded in the cavity and core, high precision, material savings, improved mold process, reducing the cost of production of the mold. The mold with a single parting surface design, mold opening and closing action slider and Bevel Pil