测绘专业外文翻译--DPS在电厂工程测量中的应用.docVIP

外文原文： The application in power measurement DPS???? 1 the surveyed area This project is located in western mountainous area of guangdong, the gully and topography, the area is broken, engineering surveying more difficult, suitable for using digital photogrammetric system mapping. According to the engineering characteristics, aerial km2, aerial scale of 14 for 8 000, mapping scale 1:2000, total layout three routes. According to the 1000,1:2000 one-for-fifty 0,1: topographic aerial photogrammetry field standard (GB/T 7931-2008), regional network layont stationing meet plane accuracy requirements point. Considering the power plant project of elevation accuracy should achieve 1/5 from this project for contour (m), more than 0.4 requirements of 0.7 m regional network covers in elevation error, this project adopts the method of field covers, namely encryption as controlled by taking the regional network covers, according to the method of field covers proper control points as method of encryption. According to the standard GB/I 7931-2008 to control point for measuring accuracy requirement flat terrain should not exceed the plane position error point 1/5, this project on the ground plane position error point for 0.6 m, namely should achieve 0.12 m accuracy requirement of control points. The precision requirement for elevation measurement shall not exceed the basic contour is 1 to 10, engineering, landform, basic contour distance hills, which should be set as 2m to 0.2 m accuracy. Considering the surveyed area for the application of rapid static GPS measuring methods established grade-d plane control network and reveals the GPS control network, and Leical230 elevation gps-rtk nominal operation precision, plane, elevation 1cm 1ppm + to + 1ppm, precision for 3cm WGS84 control and application of the coordinate conversion relations in 1980, xian, GPS - RTK surveying way can meet the control points as high measurement precision requirements. Flat 2 working process 1 the high cont