机械制造专业外文翻译--对压缩机单螺杆专用加工机床的介绍2.docVIP

外文原文： Dedicated to the single screw compressor machine updated the Introduction Abstract This paper describes four areas from the existing single-screw machine layout and structure, and put out the advantages and disadvantages of the list, because of the compressor plant single-screw machine tools and machine tool external Security information, the above introduction there is inevitably one-sided and wrong, and are therefore single-screw compressor for the production of reference works. First, introduce the layout of machine tools Decide the size of the compressor displacement of the stars round, screw diameter, mesh size and the size of the center distance, so different in diameter screw, machine tool spindle and the rotary center are also different. To meet the processing of different diameter screw, single screw Currently the layout of machine tools in general there are several options. The first is: machine tool rotary tool spindle center and the center distance for the fixed Machine tool rotary tool spindle center and the center distance for the fixed, can not adjust the center distance. Processing of several of the screw diameter on the center distance required several different specifications of the machine. Advantages: simple structure of the machine. Disadvantage: each machine can only process a specification of the screw, when the market on a certain specification requirements when the screw compressor, resulting in a machine, other machine idle. The second: the machine tool spindle box for rotary Processing screw machine according to the size of the diameter at the processing before a point of rotating spindle box. Spindle box that the machine can turn on a machine at the above-mentioned article on the use of the improvements, with the first structure of a machine tool is basically the same. Advantages: the structure of machine tool easy to adapt to a variety of specifications of the processing screw. One disadvantage: after the rotating spind