- 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
- 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
- 4、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
- 5、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们。
- 6、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
- 7、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
萘系高效减水剂合成工艺中水解反应过程的研究
何廷树 , 徐立斌
(西安建筑科技大学,陕西 710055)
摘 要:萘系高效减水剂合成工艺中水解反应过程的控制对最终产品的减水性能影响很
大。本文对萘系高效减水剂合成工艺中的水解过程进行了系统的研究,结果表明,最合适的
水解终了酸度为 28~30;由于水解终了酸度检测的滞后性,所以使用水解用水量和酸度双
因素比单用水解终了酸度控制水解过程准确;在满足酸度要求的情况下,尽可能减少水解反
应用水量可有效提高萘系高效减水剂的减水性能。
关键词:水解反应; 酸度; 水解反应用水量;萘系高效减水剂
Study on the hydrolysis process of synthesizing
technology of naphthalene-based superplasticizer
He Tingshu , Xu Libin
(Xi’an University of Architecture and Technology,Shaanxi,710055,China)
Abtract :The careful control of the hydrolysis process of synthesizing technology of
naphthalene-based superplasticizer strongly affects the water-reducing performance of final
product. In this paper, the hydrolysis process of synthesizing technology of naphthalene-based
superplasticizer was systematically investigated. The obtained results show that the optimum
final acidity degree of the hydrolysis process is 28 to 30; although the delayed characteristics of
determining acidity degree, the hydrolysis process can be controlled more precisely through
coupling the amount of water and final acidity degree in hydrolysis process than through only
using the final acidity degree; at the premise of meeting the requirement of hydrolysis acidity
degree, the reduction of the amount of hydrolysis water as much as possible , can improve the
water-reducing performance of naphthalene-based superplasticizer.
Keywords: hydrolysis reaction; acidity degree; amount of hydrolysis water;
naphthalene-based superplasticizer
1.前言
由于萘系高效减水剂的减水率较高,价格相对便宜,并且合成工艺相对成熟、稳定,所
以该类高效减水剂在我国广泛应用,其用量占到高效减水剂总用量的 80% 以上。萘系高效
减水剂合成工艺中水解反应过程的控制对最终产品的减水性能影响很大。目前在实际生产
中,萘系高效减水剂合成工艺中水解反应终了酸度一般为 25~30 ,而水解过程的用水量是由
水解反应终了时的酸度大小控制。由于水解终了酸度的检测有滞后性,所以单用酸度不易准
确控制水解用水量,经常出现酸度满足要求而用水量偏大,从而导致萘系高效减水剂的减水
性能下降。
文档评论(0)