Al-%2c2-O-%2c3-颗粒增强钼基复合材料的制备与性能研究.pdf

摘要 Subject: Preparation and properties research of Al O particle 2 3 reinforced molybdenum composites Specialty: Materials Processing Engineering Name: Dai Baozhu Supervisor: Wei Shizhong ABSTRACT Molybdenum alloys have a wide range of applications at high temperature anti- wear areas, such as head of perforated stainless steel tube, rocket launchers of the nozzle and spout, extrusion molds of non-ferrous metals and die casting molds of steels, boat and plate of rare earth sintered magnet, and so on. Currently used Molybdenum alloys have very little hard phase, so their high-temperature anti-wear capacity was limited, and it’s difficult to meet the requirements. To develop the field in anti-wear applications at high temperature areas, so search for molybdenum alloy or composite materials with high-temperature anti-wear properties have a very important significance. In this paper mixed molybdenum powder were prepared by solid-solid, liquid- solid and sol-gel incorporation method; the particle reinforced molybdenum-based composites were prepared by PM process as Al O volume fraction was 3%, 5%, 7%, 2 3 10%. The morphology of the mixed molybdenum powder, microstructure of composite materials and morphology of wear were observed by SEM; mixed molybdenum powder and phase structure of composite materials were analysised by XRD; The particle size of mixed molybdenum powder, microhardness of matrix, the density of composite materials,