不同基材高铝青铜等离子喷焊层摩擦学特性研究.docVIP

本科毕业设计（论文） 题目：不同基材的高铝青铜等离子喷焊层摩擦学特性的研究 学生姓名: 陈龙 学 号： 专业班级：材料成型及控制工程二班 指导教师： 李文生 （教授 ） 提交日期： 2013年6月14日 摘 要 本课题组已研制成功的铝青铜合金具有高强度、优良塑性、耐磨耐蚀性等优点,已成功应用于冲压模具当中。为了进一步将该合金拓广应用于表面工程领域,本文探讨分析了以铝青铜合金为基础制备的合金粉末组织性能,并采用等离子喷焊工艺在不同基材(45钢、ZQAl9-4铜合金合金和T3铜)上制备喷焊层,扫描电镜对铝青铜合金粉末及其等离子喷焊层 研究结果表明： 1、以45钢、ZQAl9-4铜合金和T3铜为基材的铝青铜粉末喷焊层组织由α固溶体(白色),β固溶体(灰色)及分布在α基体上的K相(黑色)组成、ABSTRACT Our group has successfully developed an aluminum bronze alloy with high strength, good ductility, wear and corrosion resistance, etc., which have been successfully applied in stamping dies. In order to further applied extension of the alloy to the surface engineering field, this paper analyzes and explores the basis of preparation of aluminum bronze alloy microstructure and properties of the alloy powder, and using plasma spray process on various substrates (45 steel, ZQAl9-4 Copper Alloy Alloy and T3 copper) on the preparation of spray coating, diffusion and interface elements studied convective mass of the coating composition and the impact of organizational structure, there by affecting the friction mechanism. Using scanning electron microscopy combined with energy dispersive aluminum bronze alloy powder and plasma sprayed coating microstructure and composition were studied, hoping through continuous improvements of alloy powder coating friction properties to improve mold wear, reducing wear ability , and finally the purpose of improving life of the workpiece. The study results showed that: 1、 45 steel, ZQAl9-4 copper alloy and T3 copper substrate aluminum bronze powder spray layer organization by the α solid solution body (white), beta solid solution (gray) and the distribution of the alpha base body of the K phase composition (black) alpha phase is based on the substitution solid solution Cu as a group, the beta phase (black) by alpha and Y composition the Y intermediate phase is C