最新整理discuz X2的CentOS 5+Nginx+Php+Mysql安装手册.docVIP

最新整理discuz X2的CentOS 5+Nginx+Php+Mysql安装手册 安装 —— CentOS 5 服务器 Nginx 环境推荐教程 一、系统约定 软件源代码包存放位置 /usr/local/src 源码包编译安装位置(prefix) /usr/local/software_name 脚本以及维护程序存放位置 /usr/local/sbin MySQL 数据库位置 /var/lib/mysql（可按情况设置） 网站根目录 /home/www/wwwroot（可按情况设置） 虚拟主机日志根目录 /home/www/logs（可按情况设置） 运行账户 www:www 二、系统环境部署及调整 1、检查系统是否正常 # more /var/log/messages （检查有无系统级错误信息） # dmesg （检查硬件设备是否有错误信息） # ifconfig（检查网卡设置是否正确） # ping （检查网络是否正常） # cat /proc/cpuinfo (检查CPU频率是否正常) # top (按1检测CPU核数是否正常，内存大小是否正常) 2、关闭不需要的服务 # ntsysv 以下仅列出需要启动的服务，未列出的服务一律推荐关闭： atd crond irqbalance microcode_ctl network sendmail sshd syslog 关闭SElinux：修改/etc/selinux/config文件中的SELINUX= 为 disabled 3、更换yum国内源 # cd /etc/yum.repos.d # mv CentOS-Base.repo CentOS-Base.repo.save # wget /CentOS-Base.repo.5 # mv CentOS-Base.repo.5 CentOS-Base.repo # yum clean all 注意：如果/CentOS-Base.repo.5 没有的话，直接拷贝以下文本保存为CentOS-Base.repo 放到/etc/yum.repos.d # CentOS-Base.repo # # The mirror system uses the connecting IP address of the client and the # update status of each mirror to pick mirrors that are updated to and # geographically close to the client. You should use this for CentOS updates # unless you are manually picking other mirrors. # # If the mirrorlist= does not work for you, as a fall back you can try the # remarked out baseurl= line instead. # # [base] name=CentOS-$releasever - Base - 163.com baseurl=/centos/$releasever/os/$basearch/ #mirrorlist=/?release=$releaseveramp;arch=$basearchamp;repo=os gpgcheck=1 gpgkey=/centos/RPM-GPG-KEY-CentOS-5 #released updates [updates] name=CentOS-$releasever - Updates - 163.com baseurl=/centos/$releasever/updates/$basearch/ #mirrorlist=/?release=$releaseveramp;arch=$basearchamp;repo=updates gpgcheck=1 gpgkey=/centos/RPM-GPG-KEY-CentOS-5 #packages used/produced in the build but not released [addons] name=CentOS-$releasever - Addons - 163.com baseurl=/centos/$releasever/addons/$basearch/ #mirrorlist=/?release=$releaseveramp;arch=$basearchamp;repo=addons gpgcheck=1 gpgkey=/centos/RPM-GPG-