1.ANSYS SLID65环向布置钢筋的例子.doc

1．ANSYS SOLID65环向布置钢筋的例子 ! 一个管道，环向配筋率为1%，纵向配筋率为0.5%，径向配筋率为0.1% ! FINISH /CLEAR /PREP7 !* ! 单元属性 ET,1,SOLID65 !* KEYOPT,1,1,0　！：单元主要选项设置 KEYOPT,1,5,0　！5：Number of the KEYOPT to be defined (KEYOPT(KNUM)). KEYOPT,1,6,0　！0：Value of this KEYOPT KEYOPT,1,7,1 !* !实参数1：不同方向配筋 R,1,2,.001, , ,2, .01, RMORE, 90, ,2,.005 ,90 ,90 , !Adds real constants to a set. !材料属性 !混凝土基本材料属性 MPTEMP,,,,,,,, 　！给材料属性定义温度表 MPTEMP,1,0 　　　 MPDATA,EX,1,,30E2　　！给温度表定义相应的温度数据 MPDATA,PRXY,1,,.2 !屈服准则 TB,MISO,1,1,5, ！Activates a data table for nonlinear material properties or special element input. TBTEMP,0　　　　　　！Defines a temperature for the data table. TBPT,,0.0005,15　　！Defines a point on a nonlinear data curve在应力应变区线上定义一点 TBPT,,0.001,21 TBPT,,0.0015,24 TBPT,,0.002,27 TBPT,,0.003,24 !破坏准则 TB,CONC,1,1,9, TBTEMP,0 TBDATA,,.5,.9,3,30,, !抗拉和抗压是10 倍的关系 TBDATA,,,,1,,, MPTEMP,,,,,,,, MPTEMP,1,0 !钢材基本属性 MPDATA,EX,2,,200E3 MPDATA,PRXY,2,,.27 !屈服准则 TB,BISO,2,1,2, TBTEMP,0 TBDATA,,310,2E3,,,, ! 管道内径和外径 CYL4,0,0,3000, , , ,10000 CYL4,0,0,2000, , , ,10000 VSBV, 1, 2 ! 定义局部柱坐标 CSWPLA,11,1,1,1, ! Defines a local coordinate system at the origin of the working plane. KWPAVE, 11 !move to keypoint11 WPRO,,-90.000000, VSBW, 3 WPCSYS,-1,0 !Defines the working plane location based on a coordinate system. KWPAVE, 1 WPRO,,,-90.000000 VSBW,ALL ESIZE,500,0, ! 注意：设定单元局部坐标 VATT, 1, 1, 1, 11 !* VSWEEP,ALL /DEVICE,VECTOR,1 /ESHAPE,1.0 !Displays elements with shapes determined from the real constants or section /REPLO ! 注意：红色代表最大配筋方向，绿色代表其次，蓝色表示最小配筋方向  2.混凝土非线性计算实例（1） MISO单压  !MISO单压 FINISH /CLEAR /PREP7 ET,1,SOLID65 R,1 MP,EX,1,30E3 MP,NUXY,1,0.2 TB,CONCR,1,1 TBTEMP,0 TBDATA,1,0.3,0.5,2.5,-1 TB,MISO,1,1,15 TBPT,, 100E-6, 3.0 TBPT,, 300E-6, 8.3 TBPT,, 600E-6,14.6 TBPT,, 900E-6,19.1 TBPT,,1100E-6,21.0 TBPT,,1250E-6,22.0 TBPT,,1400E-6,22.6 TBPT,,1550E-6,22.8 TBPT,,1650E-6,22.7 TBPT,,1800E-6,22.3 TBPT,,2000E-6,21.4 TBPT,,2800E-6,16.8 TBPT,,3200E-6,14.7 TBPT,,3800E-6,12