基于ARX的悬挂输送机运行轨迹仿真与受力分析计算-毕业论文.doc

基于ARX的悬挂输送机运行轨迹仿真与受力分析计算  基于 ARX 的悬挂输送机运行轨迹仿真与受力分析计算 摘  要 悬挂输送机运行轨迹仿真和受力分析计算是悬挂输送机设计中的重要环 节，本文利用 AutoCAD 面向对象的二次开发工具 ObjectARX，借助 Visual C++6.0 的开发平台，在 AutoCAD2000 环境下实现了悬挂输送机运行轨迹仿真和受力分 析计算。本文主要作了以下几个方面的研究工作： 1. 论述了计算机辅助技术原理及应用，结合悬挂输送机设计过程中遇到的 难题，提出了通过 AutoCAD 二次开发技术来进行计算机辅助设计的方法和设计 方案。 2. 在 AutoCAD2000 环境下实现对悬挂输送机运行轨迹仿真，并判断输送物 间不发生干涉的最小距离。另外还考虑了安全生产问题，通过计算输送物底部 某一点的运行轨迹所构造的包络线，来确定安全网的安装位置。 3. 改进了输送链受力计算的方法，实现了计算过程的计算机化。通过对设 计的 CAD 图形和给定参数的分析，将输送链运行轨迹转化为一条可模拟输送链 轨迹的多义线，然后用逐点张力计算法动态地计算出各种加载状态下输送链上 各点的受力，得出最大、最小受力点的力的大小和位置，拉紧装置的重量，驱 动电机所需的功率等结果。 关键词：ObjectARX；输送链；AutoCAD；多义线；仿真；悬挂输送机 IV 南京航空航天大学硕士学位论文 Abstract The moveing track simulation and the strain analysis and calculation of underslung conveyor are important in designing underslung conveyor. This thesis successfully achieves this goal in AutoCAD2000 environment by using ObjectARX which is an object-oriented redevelopment tool of AutoCAD and based on the Visual C++6.0 platform.This thesis mainly covers the following four aspects of research work: 1. This thesis states the principle and application of computer-assisted technique. Based on solving the difficulties encountered in designing underslung conveyor, the thesis brought forward computer-assisted design method by using of AutoCAD redevelopment technique and proposed resolve method. 2. The moving track simulation of underslung conveyor is realized in AutoCAD2000 environment. The minimum non-interfering distance between objects conveyed is figured out. In addition, safe productive activities are taken into consideration. To be specific, the position of safety net is made out by calculating the outline of a certain point on the bottom of the moving object conveyed. 3. This thesis has improved the strain calculation method of the conveyor chain, and realized computerization of calculating process. Based on the analysis of designed CAD graphics and the given parameters，computer can convert the CAD graphics to a AcDbPolyline which can simulate the routine of