焊接英语 教学课件 作者 赵丽玲 焊接英语参考答案.docVIP

写在前面的话 各位老师： 您们好。欢迎使用劳动版专业英语教材。如果您在使用中发现问题，或者有任何建议和意见，可与我们联系： 联系人：赵硕 联系电话电子邮箱：zhaos@ 焊接英语参考答案 Unit 1Lesson 1 Look and Learn A. 1. electrodes 2. electrode holder 3. helmets 4. safety shoes 5. gloves B. base metal- 母材 heat-affected zone- 热影响区 bond area- 熔合区 weld-焊缝 Dialogue A. carbon, electrode, weld, steel, fillet, covering, alloy B. 1-f 2-a 3-e 4-g 5-c 6-b 7-d C. E- Electrode 70- The minimum tensile strength of the deposited metal is 70ksi. 1- The electrode can be used in all welding positions, such as flat, horizontal, vertical and overhead position. 5- The type of the electrode covering is low hydrogen-sodium, the type of welding current that can be used is DCEP. Reading A. 1. No 2. Yes 3. Yes 4. No B. 1.electrodes 2. deposited metal 3. low carbon steel Learn more A.略 B. Electrode Type of covering Welding positions Type of current E7010-X high cellulose sodium flat, vertical, overhead, horizontal DCEP E7020-X high iron oxide flat AC, DCEN, DCEP horizontal fillets AC, DCEN E8016-X low hydrogen potassium flat, vertical, overhead, horizontal AC, DCEP E8013-G high titania potassium flat, vertical, overhead, horizontal AC, DCEN, DCEP Lesson 2 Look and Learn A: 1. power source 2. welding machine 3. welding rod 4. flux B: slag- 焊渣 base metal- 母材 molten flux- 熔渣 arc path- 电弧空间 welding rod - 焊丝 molten weld metal- 熔池 flux hopper- 焊剂漏斗 weld - 焊缝 flux - 焊剂 welding direction - 焊接方向 Dialogue A. 1-d 2-e 3-a 4-g 5-b 6-c 7-f B. (1) F7A6 F- Flux 7- The deposited metal will have a tensile strength of no less than 70,000psi. A- As welded. It indicates the impact tests were carried out under the welding condition. 6- V notch impact strength is at least 20 ft-lb, the minimum test temperature is -60℉. (2) EM12K E- Electrode M- The manganese content of the electrode is medium, max. 1.25%. 12- The nominal of carbon