挤出机说明书30-25（英）.docVIP

浙江金湖机械集团有限公司 浙江省舟山经济开发区B区 邮编：316001 TEL:0580-2680188 FAX:0580-2680999 Email: jinhuzj@jinhu-china. Com JHSФ30/25 Single Screw Extruder Operation Manual Zhoushan Jinhai Machinery Co., LTD. Zhejiang Jinhu Machinery Co., LTD.  Table of Contents General Description General Remarks on the Operating Manual Specifications Ancillary Equipment Range of Rotation Rate General Information Layout of the Assembly Units 3.0 Installation 3.1 General 3.2 Convey of the Extruder 3.3 Requirements of the Working Place 3.4 Adjustment of the Extruder 3.5 Laying of the Cooling Water Pipe 3.6 Filling the Gear Oil 3.7 Installation and Pretension of the Triangle Belt 3.8 Installation of the Screw 3.8.1 Cleaning 3.8.2 Installation 3.9 Connection of the Barrel 4. Operation 4.0 General Description 4.1 Warm-up to Working Temperature 4.2 Starting the Extruder 4.3 Interrupt Operation 5. Maintenance and Repairs 5.1 Emptying the Extruder 5.2 Disassembling the Screw 5.2.1 Overview 5.2.2 The function of mandrel 5.3 Cleaning the Screw 5.4 Cleaning the Sleeve Barrel 5.5 Illustration of Lubrication 5.6 Gear Reducer and Its Sealing Member and Bearing General Description General Remarks on the Operating Manual This Operating Manual provides the basic parameters and performance of the extruder for users so that they can fully understand the operation, maintenance and repairs of the machine. The Operating Manual is an aid to the users to keep the extruder in high efficiency during its lifetime service and is also conducive to avoiding accidents. Therefore, the users should grasp the requirements in the Operating Manual and strictly comply with the operating rules during their operation, periodical inspection and maintenance of the machine. In the process of operating, special attentions should be paid to the followings: A. High Temperature B. Rotatable Parts C. Voltage Before maintenance, it is required that th