一种新型高精度斜坡补偿电路.pdfVIP

4 1 3 Vol. 41, No . 3 2011 6 Micr oelectr onics Jun. 2011 黄林秀, 欧雪春, 周泽坤, 明 鑫, 张 波 ( , 6 10054) : 针对采用高端功率MOSFET 的导通电阻作电流取样电阻的同 整流电流模式降压 DCDC 变换器, 设计了一种新型高精度斜坡补偿电路该电路采用有 一定死区时间的同 整流, 防止主功率管和续流管同时导通死区过后, 主功率管给电感充电, 此时, 续流管漏极寄生电容还 在放电, 造成电流采样误差针对该问题, 提出一种斜坡补偿电路, 进行误差消除设计电路实现 形式简单, 斜坡的斜率可以灵活调节 : 同 整流; 电流取样; 电流模式; 斜坡补偿 : T N43 : A : 2011) A No el Ramp Compensation Circuit w ith HighAccuracy HU ANG Linx iu, OU Xuechun, ZHOU Zekun, MING Xin, ZHANG Bo (State Key Lab. of Elec. ThinFilms and Integr. Dev., Univ. of Electronic Science Technology of hina, hengdu 610054, P. R. hina) Abstract : A new ramp compensat ion circuit w it h highaccuracy was designed for synchronous rectification current mode stepdown DCDC con erter, in which main sw itch onresistance w as used as current sensing resistor . T o pre ent simultaneous conduct ion of main sw itch and synchronous sw itch, a certain amount of dead time w as adopted, after w hich the inductor w ould be charged immediately. At this point, the synchronous switch also discharged its drain parasitic capacitance, w hich resulted in current sensing error . The no el ramp compensation circuit, which was designed to sol e the problem, is easy to implement, and the slope was flexibly adjustable. Key words: Synchronous rectification; Current sensing ; Current mode; Ramp com pensat ion EEACC: 2570D [ 2] , 1 引言 , , 1 , , DCDC , , , 2 电路实现和工作原理 , , [ 1] 2