数字逻辑MAXPLUS.pptVIP

* * EDA Tools for digital design Maxplus 2 from Altera .com: Include : schmatic entry and HDL text editor; compiler and synthesizer; waveform editor and simulator; time analyzer; programmer; Open the Program: Open the Graphic editor Connect these unit Name your I/O and connect units Set up a project and select the device Name and save your design; file/project/set project to current file; asigne/device: FLEX10K/AUTO; And then,check and compile your design; Design check and compile If compile was not sucsses, the error information can be find in message window, we can perfect the design according to these message; If compile sucsses,design results can be find in .rpt file. Design check and compile Report for design results Verify the design with input and output Waveform editor and Simulation Open the waveform editor； Click the Name area, click the List to select the ports; File/End time:select the simulation time; Option/Grid size:select the time size; Click the value for each input,set the input waveform; Save the file after all the input be set. Waveform editor and Simulation Waveform editor and Simulation Time analyzer Floorplan editor Select logic unit from library Use text editor to input a design: Write and save your HDL text