基于计算机视觉的平视显示器视差测量方法的研究.pdfVIP

29 5 Vol.29 No. 5 2008 9 Journal of Applied ptics Sep. 2008 : 1002-2082(2008) 05-0740-05 田　苗, 刘　钧, 高　明 ( , 710032) 摘　要:　针对平视显示器的视差测量要求,在分析各种传统检测方法的 础上, 提出了一种利用 CCD 和数字图像处理技术相结合的 于计算机视觉的视差自动测量方法。详细论述了该方法的 测量原理,推导并建立了视差角与离焦量的关系,对该测量装置的光学系统进行了合理设计, 并对 后期图像处理和分析进行了具体研究。该方法利用CCD 取代人眼的主观判读, 测量精度在30″以 内,具有快速准确 定、量直观等特点, 大大提高了平视显示器的调校精度和效率。 关键词:　平视显示器; 视差; CCD; 数字图像处理 : TN206: A Parallax measurement of HUD based on computer vision T IAN Miao, LIU Jun, GA Ming ( , , 710032, ) School of ptoelectronic Engineering Xi an Institute of Technology Xi an China : - Abstract In order to improve the parallax measurement accuracy of the head up display ( HUD) , a new method based on the computer vision CCD and digital image processing, technology is put forward based on the analysis of various traditional measurements. T he principle was discussed and formulas were deduced. T he design of the optical system was performed and the method of image processing was investigated This method adopts CCD, . instead of the subjective interpretation, thus the measuement accuracy of parallax is within 30. T he new method is not only fast and accurate, but also straightford and qunatilized. T he alignment accuracy and efficiency of HUDs are improved greatly. : - ; ; ; Key words head up display parallax CCD digital image processing , , , , , [ 1]