以实践为导向的开放式MCU课程教学模式改革探索.pdfVIP

以实践为导向的开放式MCU课程 教学模式改革探索 周波，孙培勇，马旭东 东南大学自动化学院, 南京210096 E-mail:zhoubo@, sun_py6@,xdma@ 摘 要:MC （微控制器）课程是自动化专业的一门专业基础课程，具有实践性强、突出工程能力培养的特点本文在分析总结. 当前MC 课程传统教学方法所存在问题的基础上，提出以实践为导向的教学原则，将实践贯穿整个教学过程，构建包括理论教 学、课堂实验、课程设计和课外实践活动等各个环节的一体化、开放化、网络化的MC 课程教学体系，充分发挥现有教学实验 手段和各类电子竞赛、科研项目等课外实践活动的促进作用，真正实现以学生为主体的教学相长效果，培养其实践能力和创新 精神，以适应新时代人才工程技术素养培养的需求. 关键词:微控制器(MCU),单片机,教学改革,实践教学 Practice-orientedExplorationofOpenMicrocontrollerUnit TeachingModeReform ZHO Bo,SUNPeiyong,MAXudong SchoolofAutomation,SoutheastUniversity,Nanjing210096 E-mail:zhoubo@,sun_py6@,xdma@ Abstract:MCU(MicroControllerUnit)isaprofessionalfoundationcourseforautomationspecialty,whichemphasizesonhigh practicalness and engineering capacity-building. Based on the analysis and summary to current problems exiting in the traditional teaching methods of MCU, this paper proposes the practice-oriented teaching principle, in which the practical activitiesplay animportantrole throughout theteachingprocess. An integrative, open, andnetwork-based teaching mode of MC courseisconstructed includingtheoretical teaching, classroomexperiments,coursedesignandextracurricularpractical activities,which will give fullplay to the role ofthe existingteaching experimentalmeans, electronic competition,research projects,andsoon.Studentsthemselvesaretreatedasthecenterofthecoursesothatteachingwillbenefitsteachersaswellas students.Thepractical ability and innovation spirit of students are built thereby to adapt to the requirements of engineering technologytalentsofthenewage. Key ords:MicrocontrollerUnit(MCU),SingleChipMicroprocessor,TeachingReform,PracticeTeaching 