1.3.2 160-110鞍形三通开孔现场施工.pptVIP

23.02.2004 Ricom Ottobre 2004 Saturnapplication Gas distribution 21st November 2005 Saturn installation Saturn installation Saturn installation Saturn installation Saturn installation Saturn installation Saturn installation Saturn installation Saturn installation Saturn installation Saturn installation Saturn installation Saturn installation Saturn installation Saturn installation Saturn installation Saturn installation Saturn installation Saturn installation Saturn installation Saturn installation Saturn installation Saturn installation Saturn installation Saturn installation Saturn installation Saturn installation Riunione DS AL GF Piping Systems GF Piping Systems 23.02.2004 Ricom Ottobre 2004 Location in downtown Milano, 21st November 2005 Location in downtown Milano, 21st November 2005 Existing main line, welding done by trained welders, “key” the very small tranch size! Mr. Speroni, technical manager AEM, decision maker, choice Saturn for all these applications in AEM without any tender. Strategic product! Positioning Hand scraping, no specific and automatic tools Ready to be weld, one man working only! Check of the valve’s spigot insertion dept PE valve supplied by Glynwed, 30% lower in price than our purchase price. Welding unit from Glynwed, 1.000 € ! Valve installation and positioning ELGEF Plus barcode reading, easy, fast, and simple… not adhesive label on the fitting! Drilling device cutter head from Pipetech, customized with AEM drawings Extension stem to adapt for PE valves, customized with AEM drawings (all the drawings were made by Mr. Speroni) Pipetech drilling device, NON standard Item! Pipetech drilling device, pressure valve and fitting Welding process Welding process with written notes Tool preparation Cutter head for PE Prepare to be installed Cutting underpressure 50 mbar Out of the cutter and valve closing PE piece into the cutter, no pieces into the pipe Valve ready to be weld on the connection Total work made in 1 hour 2 people involv