横河端子板(配自带安全栅模块)技术手册.pdfVIP

滨州新大新机电科技有限公司 General Field Connection Speci?cations Speci?cations for I/O Modules with Built-In Barrier GS 33M50H30-40E ? GENERAL This GS describes the connection between the Modules with Barrier FIO and ?eld devices. When installing these apparatuses with intrinsically safe circuit, “Explosion Protection” TI 33Q01J30-01E and “Explosion Protection of FIO Products” IM 33Y06K01-90E for CENELEC Approval should be referenced together with this GS. ? SIGNAL CONNECTIONS ? Variation of Signal Connections The I/O Module can be connected to ?eld devices by terminal connection. The following explains the terminal blocks as well as the signal wiring that can be paired with the I/O Modules. Terminal block I/O Module Pressure clamp terminal F02E.ai ? Con?guration of I/O Module Connection A pressure clamp terminal block is provided for the terminal connection with ?eld devices. A dedicated terminal block is provided for a dual-redundant con?guration. Table Combinations of I/O Modules and Pressure Clamp Terminal Blocks Model Dual- Module name Single name redundant — Analog I/O Modules ASI133 Analog Input Module 4 to 20 mA, 8-Channel, Isolated ATSA3S ATSA3D ASI533 Analog Output Module 4 to 20 mA, 8-Channel, Isolated ATSS3S ATSS3D TC/mV Input Module AST143 ATST4S ATST4D TC: B, E, J, K, N, R, S, T / mV: -100 to 150 mV, -50 to 75 mV, 16-Channel, Isolated ASR133 RTD/POT Input Module RTD: Pt50, Pt100, Pt200, Pt500, Pt1000, Ni100, Ni200, Ni120 / ATSR3S ATSR3D POT: 0 to 10 k?, 8-Channel, Isolated — Digital I/O Modules ASD143 Digital Input Module 16-Channel, NAMUR compatible, Isolated ATSB4S ATSB4D ASD533 Digital Output Module 8-Channel, U 12 V at I 40 mA, Isolated ATSD3S ATSD3D Note: One dual-redundant terminal block is used to connect two adjacent I/O Modules. Yokogawa Electric Corporation GS 33M50H30-40E 2-9-32, Nakacho, Musashino-shi, Tokyo, 180-8750 Japan ?Copyright Feb. 4, 2008 YK Tel.: 81-422-52-5634 Fax.: 81-422-52-9802 2nd Edition Jun. 1, 2010 YK 2 ?