钨铬铸渗层显微组织和干滑动磨损特性研究.pdfVIP

第八届21省4市铸造学术会议论文 钨铬铸渗层显微组织及干滑动磨损特性研究 陈跃上官宝铁喜顺杜三明高新阳 (河南科技大学材料科学与工程学院河南洛阳471003) 摘要：采用铸渗工艺在ZG310．570材料表面形成钨铬复合层，利用扫描电镜、透射电镜研究了铸渗复合 层的显微组织、相结构；采用MM．200型磨损试验机，研究了铸渗复合层的干滑动磨损特性。结果表明： 以钨、铬为铸渗合金元素的渗层中形成的钨碳化物多以鱼骨状和块状分布；铬碳化物多以菊花状和板条 含量小于45％时，随着WC含量的增加，铸渗层的硬度增加，干滑动磨损性能提高。 关键词：铸渗显微组织干滑动磨损特性 onMicrostructureand Wear of Study DrySlidingPropertv Penetration Casting CompositeLayer CHENYueSHANGGUANBaoTIEXi．shunDU GA0 San．mingXin-yang (InstituteofMaterialScienceand ofScienceand Umversity Engineering，Henan 471003，Hcnan,China) with andchromiumwasformedonthesurfaceofZG310．570 layer bycasting Abstraet：Compositetungsten and structurewcrestudiedSEMandTEM．Drywear pcnetrationtechnology．Microstructure sIiding phase using that ofthe WasstudiedontheMM．200 machine．Theresultsshowed propertycomposimlayer testing composite Was offour as diswibuted oncast layercomposedhard．phasesFe3W3C、W2C、Cr23C6、Cr7C3，whichuniformly iron carbide likefishboneor andchromiumcarbide existed matrix．Tungstenmainlyappeared lumpish mostly alsoindicatedwhencontentofWCwaslessthan45％ inthe ofchrysanthemumorbatten．Theresults that shape weight．thedry wear WasassociatedwiththecontentofWCwhichcanenhancedthe by slidingproperty hardnessof andhadanincre