新型电磁制动下漏斗形结晶器流场的数值模拟.pdfVIP

第30 卷第8期 东 北 大 学 学 报 ( 自 然 科 学 版 ) Vol30, No. 8 2 00 9 年 8 月 Journal of Northeastern U ni ersity( Natural Science) Aug. 2 0 0 9 田溪岩, 李本文, 赫冀成 ( , 110004) : , ( ) , , , , , 250~ 300 mm, 8 000 A , , : ; ; ; ; : T F 775; T G 250. 3 : A : 2009) Numerical Simulation of NewType EMBR for Flow Field in Funnel Shape Mold TIAN X iyan, L I Benw en, HE J icheng ( Key Laboratory of Electromagnet ic Processing of Materials, Ministry of Education, Northeastern Uni ersity, Shenyang 110004, China. Correspondent: LI Benwen, professor , Email: heatli @ hotmail. com) Abstract : A newtype EMBR ( electromagnetic brake) was specially designed for the funnel shape mold during thin slab casting because of the irregularity of the w ide w alls of such molds. Numerical simulations were carried out to predict the liquid steel flow under the action of the EM BR of which the positional height and magnetomoti e force ( the number of winding turns multiplied by the current passing through the w inding) ha e both been changed. The results showed that the two changed parameters ha e slight influence on the trend of magnetic field distribution, and the distribution is heterogeneous in mold. And it w as found that the region w here the magnetic induction is max imum is slightly below the center of magnetic field and close to the inner surface of narrow wall of the mold. Compared w ith the mold w ithout electromagnetic force exerted on it, the results show ed that the liquid steel flow strands can be inhibited so as to impro e the flow field