刃口钝化技术在刀片涂层后应用探讨.pdfVIP

刃口钝化技术在刀片涂层后应用的探讨 曾伟，牟伟旭，王培，王俊波 自贡硬质合金有限责任公司 四川省自贡市 643011 摘要：由于MT．CVD涂层后的刀片存在表面粗糙度差及拉应力状态引起涂层刀片易崩 刃等问题，传统的湿喷砂工艺无法很好的消除上述缺陷，本文指出刃12钝化技术应用于 MT．CVD涂层后，可有效克服MT-CVD涂层的部分缺陷，降低涂层刀片的表面光洁度和提高抗 崩刃性能。本文通过简单阐述当今刃12钝化技术的现状，指出刀片刃12钝化效率的控制及钝 化方式是刃12钝化的关键技术，刃口钝化设备及工艺的研发水平将决定刃口钝化技术的应用 领域。 关键词：刃12钝化，MT．CVD缺陷，涂层刀片，刀具寿命，抗崩刃性能 Probeintothe of after applicationscuttingedgepassivation MT．CVD Zengwei，Mouweixu，Wangpei，Wangjunbo cementedcarbide 11 Zigong corp．，LTDSichuan，Zigong，6430 Abstract：Becauseof surface andtensilestressstatecausedthe such poor roughness problems as theblade afterMT-CVDcoated traditionalwetsand coating edgecollapse inserts，The blasting cant toremovethedefects．This outthatthe Passivation technology points good paper Cuttingedge usedinMT-CVD overcomeMT-CVD ofthe technology coating，caneffectively coatingpart defects， surfacefmishand resistanceofcoatedinserts．This elaborated Improve Edgechipping paperbriefly the ofthestatus outthatthe ofthe passivationtechnologytoday quo，Points efficiencypassivation controland isthe ofthe passivationway keytechnologypassivation．11heCuttingedgepassivation and levelwilldecidethe equipmenttechnologydevelopment Cuttingedgepassivationtechnology fields． application Passivation，MT—CVDdefect，CoatedInserts，Tool Keywords：Cuttingedge 1ife，Edge