数字散斑相关法在变形测量中的应用_陈志新.pdfVIP

19 7 Vol. 19 No. 7 2011 7 Optics and Precision Engineering Jul. 2011 1004-924X( 2011) 07- 1480-06 1, 2 1 1* 陈志新 , 梁 晋 , 郭 成 ( 1. 西安交通大学机械工程学院, 陕西 西安710049; 2. 东华理工大学机电工程学院, 江西 南昌330013) : , , , ( DSCM) , , DSCM , , , XJT UDIC, , 0. 2% , , : 数字散斑相关法; 变形测量; XJT UDIC :TH 823; O436. 1 : A doi: 10. 3788/ OPE. 1480 Application of digital speckle correlation method to deformation measurement 1, 2 1 1* CHEN Zh-i xin , LIANG Jin , GU O Cheng ( 1. M echanical Engineer College, X ian J iaotong University , X ian 710049, China; 2. Mechanical Electrical Engineering Dep artment, East China Institute of echnology, N anchang 330013, China) * Corresp onding author , E-mail : gch@mail. xj tu. edu. cn Abstract: T o overcome the limitations of traditional deformation measurement methods and complete the comprehensive measurements of the general deformation and the various point displacements w ith- in a measurement scope in any time, the Digital Speckle Correlation Method( DSCM) w as used in accu- rate deformation measurement. Firstly, by comparison w ith traditional methods, it summarized the advantages of the method in non-contact, high precision, simple and flexible operation, overall meas- uring and so on. And then the principles of the DSCM w ere elaborated on the five aspects, the rele- vant mathematical models w ere established and the corresponding measurement and analysis softw are XJT UDIC w as developed. By using this softw are w ith the relevant hardw are devices, a tensile de- formation process w as tested