Car Monitoring SystemTeam IPA.ppt

Car Monitoring SystemTeam IPA Kirill Belyayev Amjad Chaudhry Arush Dhawan Aditya Kaundinya Bilal Yousufi Introduction and Development Kit Amjad Chaudhry Project Outline Division of Labor Aditya and Amjad will work solely on software issues A/D Converter Zigbee Communication Kirill Mainboard Design Hardware/Software Implementation Will also work with Aditya and Amjad, with software implementation of hardware (I.e. LCD, Keypad, RS-232, User Interface) Arush and Bilal Sensors’ schematic and design PCB for Main Board and Sensors Development Kit Software Aditya Kaundinya Software Overview Demo Software Our development kit came with demo code that allowed us to test our hardware. -Range Finder – Code that adjusted the number of blinking LED’s respective to the distance between the two boards. -UART Demo – Wireless transmits a user’s keystrokes to the terminal of another pc using the Zigbee transceivers. Example Code (Range Detection) SMAC Functions A-D Converter Tire pressure sensor gives an analog voltage value. The output pin of the sensor is connected to one of the 8 A-D converter pins on the microcontroller. The voltage signal from the sensor is converted to a binary number using the microcontroller. The voltage-pressure relation below is used to convert the digital value into the corresponding pressure value. Immediate Software Goals Main Board Kirill Belyayev Main Board Schematic Microprocessor RF Data Modem Serial Communication Interface Keypad LCD Interface Sensor Schematics Arush Dhawan Sensor Schematic Tire Pressure Chip - MPX4250 Operates at 5V Max Input of MC9S08 is 3.6V Attenuator Readjust Transfer Function in Software Sensor Chips are interchangeable, the only thing that will need to be adjusted the attenuator and software. Temperature – FM20P5X – 3.3V X-Y Accelerometer – MMA1260D - 5 V Z Accelerometer – MMA6261Q 3.3V Proximity Sensor – Sharp GP2Y0A21YK - 3.3V Tire Pressure Chip Temperature Chip Z Accelerometer Chip X-Y Accelerometer Proxim