ROBOTOCS CLUB SAFETY TEST.doc

ROBOTOCS CLUB SAFETY TEST 1. Any dangerous conditions in the lab must be reported to the teacher (a) when convenient (c) at the close of class (b) at once (d) after school 2. Guards and other safety devices are for your protection. Always (a) remove them (c) keep them in place (b) cover them (d) move them out of the way 3. Disturbing another student while he is working is (a) helpful (c) good practice (b) poor manners (d) dangerous and wasteful 4. Do not carry sharp or pointed tools or materials in your clothing. Hold sharp points or edges (a) up (c) in your hands (b) towards yourself (d) down and away from others 5. When working with hand or power tools, all loose clothing and jewelry must be (a) removed (c) left on (b) adjusted (d) carefully watched 6. In case of injury, report at once to the the fire department (c) nurse shop advisor (d) dean 7. If equipment does not work properly, or there are damaged parts, shut off machine and inform the (a) shop advisor (c) custodian (b) company (d) principal 8. Before a student operates a machine, he must have (a) received safety instruction (c) instructors permission (b) passed the safety test (d) both “a” and “b” 9. Vise handles and control knobs are to be tightened by (a) hand (c) a wrench (b) a hammer (d) a pry bar 10. When using sharp-edged tools, you should always cut with (a) the tool pointed away (c) the dull edge of the tool (b) the tool pointed toward you (d) the edge of the tool down 11. If the switch on any power tool is defective report it immediately to the: (a) custodian (c) principal (b) shop advisor (d) tool clerk 12. After the drill has been tightened in the chuck the next step is to: (a) clamp the work (c) remove the chuck key (b) turn the power on (d) hold the drill firmly 13. The electric cord and plug on any power tool must at all times be kept: (a) out of the working area (c) in a safe place (b) dry (d) well oiled 14. As the drill breaks through the wor