PLC在中速磨润滑液压站联锁保护控制中的应用.pdfVIP

PLC 在中速磨润滑液压站联锁保护控制中的应用 1 2 1 李强 ，丛日东 ,徐维维 1 2 （中国矿业大学化工学院，江苏 徐州，221008； 晋城煤业集团，山西 晋城，048006） 摘 要：通过对中速磨润滑油站和液压站工作特性的分析，设计出自动启停顺序控制流程，并设计开发了“PLC +工业以太网+IPC” 的监控模式。系统由两台PLC 控制柜、两套工控监控站以及若干温度、压力传感器等组成硬件结构，并结合STEP7 V5.4 编程软件 和MCGS 组态软件，采用MPI 和OPC 通信方式，最终实现润滑油站和液压站的自动启停、在线监测和远程监控，为电厂的安全提供 了重要保证。 关键词：中速磨；润滑油站；液压站；联锁； 监控系统 Application of PLC in the interlock protection of the lubrication station and hydraulic station of medium speed mill 1 2 1 LI Qiang ,CONG Ridong ,XU Weiwei 1 ( China University Of MiningTechnology,Xuzhou 221008,Jiangsu Province 2JinCheng Coal Industry Group, Jincheng 048006, Shanxi Province) Abstract ：By analyzing the Characteristic of the lubrication station and hydraulic station of medium speed mill, I design the automatic start-stop control process; I get the parameters effecting the function of the ventilator, and design the model of “PLC + Industrial Ethernet + IPC” for control system. The hardware configuration which consists of two PLC control cabinets, two sets of industrial monitoring station and a number of certain temperature and pressure sensors, combining with the programming software (Step7 V5.4) and configuration software (MCGS), adopt the method of MPI and OPC for correspondence. Finally, it realizes the purpose of automatically start and stop, on-line monitoring and remote monitoring, and provides an important guarantee for the production safety of plant. Keywords: medium speed mill; lubrication station; hydraulic station; interlock; control system 0 引言 煤粉制备系统具有现场工艺复杂、设备类型多样、I/O 点数多、现场防爆环境要求高等特点，为保证煤粉喷