TCP ServerClient mode - Sollae Systems - Remote IO Control TCP和模式sollae系统远程IO控制.pdfVIP

Application Note TCP Server/Client mode Version 1.1 20 11-09-21 Sollae Systems Co., Ltd http://www.sollae.co.kr TCP Server/Client mode Ver. 1.1 Contents Contents - 1 - 1 Overview - 2 - 1.1 Overview - 2 - 1.2 Application Examples - 3 - 1.2.1 Emergency Notification - 3 - 1.2.2 Bypass connection - 3 - 1.3 Available Products - 4 - 2 Setting - 5 - 2.1 Setting with the ezManager - 5 - 2.1.1 Parameters - 5 - 2.1.2 An Example of Setting - 6 - 3 Operation - 8 - 4 History - 10 - Sollae Systems Co., Ltd. - 1 - http://www.sollae.co.kr TCP Server/Client mode Ver. 1.1 1 Overview 1.1 Overview Both server and client are needed to establish TCP connection. The TCP server waits requests from clients and the TCP client send request segments to servers. All the ezTCP series support both connection modes. But the changing values of the environmental parameter should be done before switch the other mode. Fig 1-1 previous mode conversion By using the TCP server/client mode, you don’t have to bother to change the setting in every time. This mode allows ezTCP to perform as a TCP server or client without any changing the setting. Fig 1-2 mode conversion in TCP server/client mode  In this mode, just one host can be connected with ezTCP at the same time. Note that no matter wh