单片机课程设计水温控制c语言程序.docVIP

#include stc12c5610ad.h #include intrins.h #define uchar unsigned char #define uint unsigned int uchar code ledl[]={0XC0,0XF9,0XA4,0XB0,0X99,0X92,0X82,0XF8,0X80,0X98}; uchar data led_point[2]={0xf7,0xfb}; uchar code channel[]={0x00,0x02,0x03,0x04,0x05,0x06,0x07}; uchar data num[2]; sbit key2=P3^7; sbit key3=P2^7; sbit key4=P2^6; sbit key=P1^3; long uint k,n=0,t,min,max; void disp(uint disp_value); void Bcd(uint bcd_value); void delay(uint delay); void ad_init(); int getad(uchar channel); float ad_av(uchar channel); void Relay(); uchar jianpan(void); /////////显示/////////// void disp(uint disp_v