碎纸片拼接复原模型.pdfVIP

Hans Journal of Data Mining 数据挖掘, 2014, 4, 1-8 /10.12677/hjdm.2014.41001 Published Online January 2014 (/journal/hjdm.html) Scraps of Paper Splicing Recovery Model Jihua Li, Xinfeng Kong, Chunmei Fu College of Science, Shandong Jiaotong University, Jinan Email: 823850453@ Received: Dec. 30th th nd , 2013; revised: Jan. 13 , 2014; accepted: Jan. 22 , 2014 Copyright © 2014 Jihua Li et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unre- stricted use, distribution, and reproduction in any medium, provided the original work is properly cited. In accordance of the Creative Commons At- tribution License all Copyrights © 2014 are reserved for Hans and the owner of the intellectual property Jihua Li et al. All Copyright © 2014 are guarded by law and by Hans as a guardian. Abstract: The main purpose of this paper is to explore how the paper scraps of neat edges could be restored. First, we can obtain the paper scraps of neat edges after cross cut and then length cut. With the help of the image-processing software, Matlab, we can transfer the images into corresponding matrix, and then binarize the matrix and get the 0-1 matrix. We classify the paper scraps with the same location features using cluster analysis. Then we match the first column and the last column in certain pixel matrix with the corresponding columns in other pixel matrix based on the edge matching. According to the edge matching, we determine the order of the pictures, splice them and then check them with necessary manual adjustment, so we get the transverse paper. Finally, the same method can be applied to the transverse paper while we match the lines instead of the