沥青炭微观结构对其压缩强度影响.pdfVIP

第25 卷 第1期 总第105期 Vol 1 2 5 No 1 1 Journal of Materials Science Engineering Feb . 200 7 :1673-2812(2007)01-0091-04 , , , ( , 710025) = , 2500e ; ; ( SEM ; XRD ; : , , ; ; , = ; P; ; :T B332 : A Effect of the Microstructure of Pitch Derived arbon on its ompression Strength HUANG Jian, HAO Zh-i biao, ZOU Wu, LIU Jian-jun (Xi. anAerospace omposites Research Institute, Xi. an 710025, hina) = Abstract Pitch derived carbons w ere prepared by carbonization and graphitization of high temperature pitch and impregnating pitch at different pressures and temperature of 2500 e . Bulk density, porosity of pitch derived carbon w ere determined . T he morphology of pitch derived carbon has been observed by scanning electron microscopy ( SEM . X- ray diffraction method w as used to analysize the graphitization degree of pitch derived carbons after graphitization at diff erent pressures. The compression strength of pitch derived carbons w as tested. The results indicate that the bulk density of pitch derived carbon increases, at the same time the compression strength increases and the porosity decreases with an increase of the pressure. The microstructure of pitch derived carbon transformed from flow domain type to grained mosaics type and f ield type. The graphitization degree w ith flow domain type texture w as higher, but the compression strength of pitch derived carbons w ith such texture w as low er. = Key words pitch derived carbon; CPC composites; structure; co