modeling__V建模应用.ppt

Modeling Applications of Unigraphics 建模应用（Ⅱ） Datum Plane 基准面 Datum Axis 基准轴 Datum CSYS 基准坐标系 创建一个相关的坐标系，基准坐标系是特征 (DATUM_CSYS)，可以用MNT或 Edit? Feature?Parameters操作，与其它特征相同。基准坐标系由基准轴、基准平面和原点组成，每一个组成元素可以单独选择，用来创建其他几何对象。 几何体改变，基准坐标系更新，创建的特征或对象也更新（无论有无component，都是相关的） 基准坐标系用来定位成型特征、定义方向参考、建立配对条件（用基准平面/轴）。 Datum CSYS 基准坐标系 Extruded Body 拉伸成体 截面线串沿着指定的方向拉伸，产生拉伸体。方向为相关的。 拉伸到目标体上，可以有多个面。 Editing Features 编辑特征 Instance 引用 对特征或特征组进行复制，创建多个形状相同的特征。 因引用特征之间相关，所以： Quickly create patterns of features such as bolt hole circles. Create a number of similar features and add them to the model in one step. Edit all instanced features in one step. Rectangular Array 矩形阵列 This option lets you create a linear array of instances from one or more selected features. Rectangular instance arrays can be either two-dimensional in XC and YC (several rows of features) or one-dimensional in XC or YC (one row of features). These instance arrays are generated parallel to the XC and/or YC axes based on the number and offset distance you enter. 阵列后的特征必须位于同一目标实体上。 Circular Array 圆形阵列 This option lets you create a circular array of instances from one or more selected features. More about Array You cannot instance the following objects: Hollows/Blends/Chamfers/Offset sheets/Datums/Trimmed sheet bodiesInstance sets/Taper features/Free form features/Trimmed features NOTE: If you create an Edge Blend, Chamfer or Thread on an instance in an instance set using the Blend All Instances, Chamfer All Instances or Include Instances options (respectively) turned on, the blend, chamfer or thread is added to all of the current instances in that set. Edit Array Mirror Body 体镜像 Lets you mirror an entire body about a datum plane，建立对称零件。 When you mirror a body, the Mirror feature is associative to the original body - it has no editable parameters of its own. You can combine the original and mirrored bodies using the Unite option to create a symmetrical model, as shown in the figure .Note that when using