泡沫铜板与铜粉复合烧结多孔材料的制备.pdfVIP

下半月出版 Material Heat Treatment 材料热处理技术 泡沫铜板与铜粉复合烧结多孔材料的制备 周 蕤 陆龙生 , 华南理工大学 机械与汽车工程学院 表面功能结构先进制造广东普通高校重点实验室 广东 广州 ( , 510640) 摘 要：介绍了泡沫铜与铜粉的复合多孔材料松装烧结成形工艺；分别采用 SEM 观察其几何结构特征和称重法， 分析了复合多孔材料的收缩率及孔隙率。 结果表明，该材料具有大比表面积、高孔隙率特征；采用与纯铜粉烧结类比的 方法，探讨了烧结温度、保温时间及铜粉粒径对复合多孔材料的收缩率和孔隙率的影响。 结果显示，相比于铜粉烧结多 孔材料，泡沫金属与铜粉烧结复合多孔材料具有更小的收缩率及更大的孔隙率。 关键词：泡沫铜； 铜粉； 复合烧结； 多孔材料 中图分类号： 文献标识码： 文章编号： TB331 A 1001-3814(2011)04-0059-04 Manufacture of Compound Sintered Porous Metal with Copper Powder and Copper Foam ZHOU Rui, LU Longsheng (School of Machinery and Automobile Engineering, Key Laboratory of Surface Functional Structure Manufacturing of Guangdong Higher Education Institutes, South China University of Technology , Guangzhou 510640, China) ： Abstract An innovative compound sintered porous metal, which is composed of copper powder and copper foam, was introduced. The shrinkage rate and porosity of the compound porous metal were analyzed by SEM and weighting. The results show that the compound porous metal has large specific surface were and high porosity. The fabrication influence factors, including sintering temperature, holding time and particle size of copper powder were analyzed. Compared the compound porous metal with copper powder sintered porous metal, the results show that the former